Vivotek PT7135 manual Somewhere Between Real-time and Clear Images

Page 24

Somewhere Between Real-time and Clear Images

If you have a broadband network, set “Fix quality” at ”Normal” or better, rather than setting “Fix bit rate”. You can also fix the bandwidth according to your actual network speed and adjust the frame rate. Start from 30 fps down for best results but not below 15 fps. If the image qualities are not improved, select a lower bandwidth setting.

- 23 -

www.vivotek.com

Image 24

Contents Page Technical@vivotek.com Before You Use This Product Table of Contents FTP Configuration file Upgrade firmware Technical specifications Package Contents Hardware installation To install in EthernetSoftware Installation Page Page Page Initial Access to the Network Camera Check Network SettingsAdd Password to Prevent Unauthorized Access How to Use AuthenticationInstalling plug-in Primary user’s capability Main Screen with Camera ViewConfiguration Client SettingsCamera view View capabilitiesPage Pan/tilt control buttons Pan speedTilt speed PanClient settings Url http//Network Camera/client.html Administrator’s capability Fine-tuning for Best PerformanceFor Viewing by Mobile Phone For Best Real-time Video ImagesOnly Quality Images Will Do Somewhere Between Real-time and Clear Images Protect Network Camera by passwords Opening accounts for new usersBuild a security application Software revision upgrade Definitions in Configuration System parameters Security settings Network settings Network typeLAN & PPPoE Get IP address automatically & Use fixed IP addressHttp Rtsp StreamingPage Url http//Network Camera/setup/network.html Ddns Access List Video Settings Audio and VideoGeneral Video orientationAudio settings Image Settings Camera Control Camera control areaPreset function area Email & FTP FTPUrl http//Network Camera/setup/mailftp.html Motion detection Application settings SnapshotWeekly schedule Snapshot file name prefix Send out the snapshot while motion detectionSequential operation Method for sending snapshotPage Video Clip System log Viewing system parameters Maintenance CalibrateTroubleshooting Reset and restoreStatus LED URL commands of the Network Camera Get server parameter valuesMethod GET/POST Set server parameter values ResponseWhere parameter pair is parameter=value\r\n WirelessNetwork Camera Skip to invoke default serverAvailable parameters on the server HhmmssGroup Security BlankBlank 192.168.0.99255.255.255.0 Shorter 554 55585556 Live.sdp256 176x144 for mobile640x480 For ComputerFor 60Hz only AAC4 for computerGamr for mobile 12200 PanspeedTiltspeed Presettilt0~9 Usernameemail Camera Control Script.vssxIP address 514Recall Application page CGI command Prefixappindex Capture single snapshot PrefixAccount management System logs Privilege=confConfiguration file Upgrade firmwarePage Technical specifications NetworkingTechnology License Notice MPEG-4 AAC TechnologyElectromagnetic Compatibility EMC Liability