AGFA SR 24 manual Safety Information SR24 iT Laser Printer, For United States Laser Safety

Page 10

iii

Safety Information (SR24 iT Laser Printer)

Laser Safety

This printer is a page printer which operates by means of a laser. There is no possibility of danger from the laser, provided the printer is operated according to the instructions provided in this manual.

Since radiation emitted by the laser is completely confined within protective housing, the laser beam cannot escape from the machine during any phase of user operation.

Internal Laser Radiation

Maximum Radiation Power: 8.8 ⋅10-4(W)

Wave Length: 770-810 (nm)

This is a Class IIIb Laser Diode Assy. that has an invisible laser beam. The print head unit is NOT A FIELD SERVICE ITEM. Therefore, the print head unit should not be opened under any circumstances.

For United States

Laser Safety

This printer is certified as a Class 1 Laser product under the U.S. Department of Health and Human Service (DHHS) Radiation Performance Standard according to the Radiation Con- trol for Health and Safety Act of 1968. This means that the printer does not produce hazardous laser radiation.

CDRH Regulations

The Center for Devices and Radiological Health (CDRH) of the U.S. Food and Drug Ad- ministration implemented regulations for laser products on August 2, 1976. These regulations apply to laser products manufactured from August 1. Compliance is mandatory for products marketed in the United States. The label shown below indicates compliance with the CDRH regulations and must be attached to laser products marketed in the United States.

WARNING: Use of controls, adjustments or performance of procedures other than those specified in this manual may result in hazardous radiation exposure.

All other users

WARNING: Use of controls, adjustments of performance or procedures other than those specified in this manual may result in hazardous radiation exposure.

This is a semiconductor laser. The maximum power of the laser diode is 8.8 ⋅ 10-4W and the wavelength is 770-810 nm.

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Agfa SR 24 iT Safety Information Page Page Page Page Routine Precautions Welcome Following safety rules should be observed For United States Laser Safety Safety Information SR24 iT Laser PrinterAll other users For Denmark Safety Information Laser PrinterFor Finland, Sweden For Norway Ozone Release For all Users Contents Chapter MSP 3000 Printer ContentsChapter Miscellaneous Contents Contents Chapter Power Source Installation PrecautionsInstallation Site GroundingSpace Requirements Installation PrecautionsSR24 iT Scanner A3/A4 Laser Printer A3/A4 Laser PrinterA4 Laser Printer Operating Environment Using the PrinterCare of Printer Supplies Turning the Power On and Off Turning onTurning the Power On and Off Turning OFFMemo Scanner System Overview Pcscsi Interface Mode SR24iT + Personal Computer System ConfigurationPrinter Mode SR24iT + Choice of 2 Laser Printers System OverviewParts of the SR24iT Scanner/Printer ScreenControl Panel Keys and Indicators Control Panel BasicControl Panel Keys and Indicators Scanner Chapter Scanner Chapter Scanner Chapter Start Key Control Panel Shift Function Job Recall Key Control Panel Keys and Indicators Lamp Illuminance KeyResolution Key Zoom KeyMisfeed Clearing Procedure When Misfeed/Call-Tech.-Rep. Code Lights upMalfunctions Procedure CodeCall-Tech.Rep.Procedure LocationImage Processing Functions Screen Image Print ImageImage Processing Functions Screen Image Print Image Printing/Scanning StartSelecting a Projection Lens Scanning Size FilmReplacing the Projection Lens Zooming and Focusing Zooming of the Screen Image Focusing of the Screen ImageAuto Image Rotation Image RotationAuto Skew Correction Posi positive film Selecting the Film TypeAuto Nega negative filmUsing Manual Exposure Using Auto ExposureSelecting the Image Density To Entry the Number of Prints Setting the Number of Prints to be MadeCorrecting Entry Paper size Selecting the Output FormatSelecting the paper source StandardSelecting the Output Format Selecting the print formatDisplay Paper Feeding Description Selecting Auto Masking Using Auto MaskingOperating Conditions for Auto Masking Manual Masking Panels Optional KeyareaSelecting Trimming Using Manual MaskingDefining the Print Area Clearing a Defined Print/Scan Area Using Manual MaskingSelecting Masking Fit Using Centering and FitCentering Screen Image Print Image Centering OFF Centering onUsing the Cycle Print Mode Specifying the interval between scanning operationsOperating in the Cycle Print Mode Using the Cycle Print ModeSelecting the Connection Mode Selecting the Resolution Connection mode Resolution DisplaySwitched in order of 1J → 2J → 3J →1J Registering the Job ProgramCalling the Job Program Zoom + Using the Electrical ZoomZoom Using the Electrical Zoom Clearing the Zoom magnificationAdjusting the Illumination of the Screen Replacing the Projection Lamp Replacing the Projection Lamp A3/A4 Laser Printer Parts of the Printer Print TrayInterface Connectors Parts of the PrinterTroubleshooting and Maintenance Replenishing the Paper SupplyTroubleshooting and Maintenance Loading Paper into the Paper Feeding Tray TrayLoading Paper in the Paper Cassette Replacing the Toner Cartridge Push the Print Tray in before opening the Upper Unit Clearing Misfeeds Clearing a Misfeed from the Paper Feeding TrayClearing a Misfeed from the Paper Cassette Clearing a Misfeed from inside the Printer Solving Printing Problems Symptom Cause ActionSymptom Cause ActionMemo Miscellaneous Specifications Agfa SR24iT Microfilm Scanner/PrinterAgfa SR24iT+ A3/A4 Laser Printer Agfa SR24iT + A4 Laser Printer Printer’s DimensionsPrinter’s Weight Printer’s OptionUser Settings Initial Setting Remark Initial Settings ListDescription Selection Initial Setting Initial Settings List System Settings Description Initial Settings List System Settings Description Selection Screen Carrier Glass Option Cleaning the ScannerSystem Care Outer CoversExterior Panels Cleaning the A3/A4 Laser PrinterSystem Care For Key Operator’s Use Only

SR 24 specifications

AGFA SR 24 is a prominent member of AGFA's esteemed line of professional photographic films, designed to cater specifically to the demands of commercial photography and image production. This film is well-regarded for its exceptional balance of sensitivity, tonal range, and sharpness, making it a go-to choice for professional photographers seeking high-quality results in various lighting conditions.

One of the main features of AGFA SR 24 is its notable ISO rating of 24, which offers excellent performance in bright lighting situations while maintaining impressive results in lower light settings with proper handling. Its fine grain structure allows for crisp, defined images that demonstrate clarity, ensuring that even the most intricate details are captured effectively.

The technology behind AGFA SR 24 involves advanced emulsion formulation, utilizing a layer of sensitized silver halide crystals that responds uniformly to light. This process provides an extended tonal range, allowing for richer blacks and brighter highlights in the resulting images. The film's ability to retain detail across the dynamic range makes it particularly suitable for portraits, landscapes, and commercial work.

Another characteristic worth noting is AGFA SR 24’s color fidelity, which is one of its standout attributes. This film reproduces colors with accuracy, ensuring that the final output closely aligns with the original scene or subject. Photographers often choose this film for projects where accurate color reproduction is paramount, enhancing the overall quality of the images.

AGFA SR 24 is also versatile in terms of development options; it can be processed using a variety of chemical processes, which allows photographers to experiment with different results. The film can be developed in standard C-41 chemicals or handled in unique ways to produce distinctive aesthetic effects.

In summary, AGFA SR 24 is a photographic film that combines sensitivity and granularity with extraordinary image detail and color rendering. Photographers appreciate its adaptability, making it a reliable choice for both studio setups and fieldwork. The superior technology embedded in its design ensures that it meets the rigorous standards of professional use, allowing for the production of high-quality images that stand the test of time.
Top Page Image Contents