Scanner Chapter 2
3. Control Panel Keys and Indicators
Masking Key:When pressed, this key rotates from OFF to the Auto, Trimming or Masking functions.
Each time this key is pressed, selection is switched in order of "OFF → Auto Masking → Manual Trimming → Man- ual Masking → OFF."
Auto Masking:
The Auto Masking function will omit the frame
•The previous Centering/Fit setting is applied whenever ON is selected from the OFF state.
•If OFF is selected from the ON state, Centering/Fit is disabled.
*Auto Masking is not applicable with the Masking or Trimming settings.
Trimming:
When ON is selected, the image is printed (scanned) with the
Masking:
Prints only the image outside of the area that is de- fined on the Screen.
•If Trimming is selected from the OFF state, the previ- ously entered settings for Centering/Fit and Manual Masking are applied.
•From Trimming, when Masking is selected, the Centering/Fit setting is disabled and the previous set- tings for the Masking area are applied.
•The manual masking area will be cancelled whenever OFF is selected from the Masking state.
*Neither Trimming nor Masking are available through the Auto Masking function.
*Trimming and Masking cannot be set when the Scanner is connected to the PC.
Print Mode Key: Allows you to fine tune the image quality of the print ac- cording to the original being used. Rotate between Text, Fine and Photo with every press of this key.
1)Text: For use with text images.
2)Fine: For use with lower grades of film.
3)Photo: For use with photo images.