AGFA SR 24 manual Start Key

Scanner Chapter 2

2-10

3. Control Panel Keys and Indicators

Memory Input Key: To store one of the following functions into the memory of the Scanner, first set one of the functions on Control Panel and then press this button with the head of a pen or other device. The next time the scanner is turned ON, that func- tion will appear as a default setting until a new one is en- tered. (Maximum three kind of setting can be memorized.)

1)Negative or positive

2)Print mode

3)Output Format

4)Print image density

5)Exposure mode

6)Centering or Fit

7)Masking

8)Auto Skew Correction

9)Horizontal Area setting

10)Vertical Area setting

11)Electrical Zoom

12)Resolution

	NOTE
	If you do not press the pinhole for at least 60 seconds
	after a setting has been made with the Auto Reset
	function set to ON, the previous setting remains valid.
Clear/Stop Key:
	Press to clear the setting on the Multi-Print Display, reset-
	ting it to “1” or to stop a multi-print cycle.
Multi-Print Keys:	This key is used to set the number of prints when printing
	continuous, multiple pages.
	The value of this setting increases by one (1, 2, 3...) with
	every push of the key. (Maximum 19)
	* Laser Printer mode only.
Start Key:	Press to make a print (scan) of the image shown on the
	Screen.