25. Replacing the Projection Lamp
Chapter 2
4 | Insert a new Projection Lamp so that |
the mark on its base is facing |
upwards. Make sure that the new Projection Lamp is inserted securely so that there is no gap between the Projection Lamp and the Lamp Socket.
NOTE
Do not touch the reflector mirror surface of the Projection Lamp. Fingerprints, smudges or debris should be wiped clean with a soft, dry cloth.
6 | Slide the Projection Unit back into |
the machine. |
NOTE
If the Projection Unit is not properly installed, power will not be supplied and the machine will not operate.
Scanner
Mark
7 Turn the Power Switch ON.
5 | Insert the new Projection Lamp all |
the way into the Lamp Holder. |