Kodak 8810 manual Making a Test Print

Page 13

Setting Up the Printer

Making a Test Print

1

Menu				Paper Advance

Make a test print to check that the printer is installed and set up correctly.

1.Press Menu twice until Test Print Mode appears.

2.Press Enter to start printing the test print.

For more information on using the operator panel in Setup mode, see “Printer Settings” on page 2-3.

Enter

Paper Rewind/Clear

2

1-9

Image 13

Contents Photo Printer Page Table of Contents Electromagnetic Compatibility EMC Package Contents Setting Up the PrinterPreparing the Printer for Use Connecting the USB Cable Connecting the Power CableTurning On the Printer Loading the Ribbon Handling and Storing the Paper and RibbonLabel Loading the Paper Remove the label from the paper roll Gently close the paper door Making a Test Print Page Making Prints Operating the PrinterHandling and Storing Prints Operator Panel LightsButton Use Operator Panel ButtonsDisplay Description Printer SettingsPage Maintaining the Printer Performing Routine MaintenanceCleaning the Thermal Print Head and the Peel Roller Cleaning the ExteriorPeel roller while wiping to clean all of the roller surface Cleaning the Cleaning Rollers Maintaining the Printer Page Problem Description or Cause Possible Solution TroubleshootingMessage Description or Cause Possible Solution Resolving Operator Panel Status/Error MessagesClearing a Paper Jam Recovering from a Power Interruption Appendix a Additional Information Printer SpecificationsSystem Requirements Kodak Thermal Printer Cleaning Kit Thermal Printer Cleaning KitPrinter Supplies Getting Help Packing and Transporting the PrinterPage Important Safety Information Appendix B Safety and Regulatory InformationSafety Labels Safety Regulatory and Safety ComplianceSafety and Regulatory Information Noise Emission Disposal China RoHS