Kodak 8810 manual Preparing the Printer for Use

Page 6

Setting Up the Printer

Preparing the Printer for Use

CAUTION:

The printer weighs approximately 60 lbs (27 kg) and is heavier at the front than at the back. Always use two people when lifting or moving the printer.

NOTE: Keep the carton and packaging in case you ever need to transport the printer.

1. Remove the tape from the top cover and paper door.

2. Insert the trim tray into the printer as shown.

3. Insert the exit tray into the printer as shown.

1-2

Image 6

Contents Photo Printer Page Table of Contents Electromagnetic Compatibility EMC Setting Up the Printer Package ContentsPreparing the Printer for Use Connecting the Power Cable Connecting the USB CableTurning On the Printer Handling and Storing the Paper and Ribbon Loading the RibbonLabel Loading the Paper Remove the label from the paper roll Gently close the paper door Making a Test Print Page Handling and Storing Prints Operating the PrinterMaking Prints Operator Panel LightsOperator Panel Buttons Button UsePrinter Settings Display DescriptionPage Performing Routine Maintenance Maintaining the PrinterCleaning the Exterior Cleaning the Thermal Print Head and the Peel RollerPeel roller while wiping to clean all of the roller surface Cleaning the Cleaning Rollers Maintaining the Printer Page Troubleshooting Problem Description or Cause Possible SolutionResolving Operator Panel Status/Error Messages Message Description or Cause Possible SolutionClearing a Paper Jam Recovering from a Power Interruption Printer Specifications Appendix a Additional InformationSystem Requirements Thermal Printer Cleaning Kit Kodak Thermal Printer Cleaning KitPrinter Supplies Packing and Transporting the Printer Getting HelpPage Appendix B Safety and Regulatory Information Important Safety InformationSafety Labels Regulatory and Safety Compliance SafetySafety and Regulatory Information Noise Emission Disposal China RoHS