Setting Up the Printer
Connecting the Power Cable
If you received more than one power cable with your printer, make sure to use the correct power cable for your country.
1. Check that the power switch is turned off (
).
CAUTION:
The power outlet must be grounded. An ungrounded outlet can cause fire, electric shock, or harmful interference to nearby electrical devices.
2.Connect the power cable to the power connector on the back of the printer and to a grounded power outlet.
Connecting the USB Cable
1. Check that the power switch is turned off (
).
2. Connect the USB cable (included with some configurations) to the USB connector on the back of the printer and to the USB connector on the computer.
Turning On the Printer
Move the power switch to on ( ).
On the operator panel, the orange Power light illuminates. If paper and ribbon are loaded, a Ready message appears.
To turn off the printer, move the power switch to off (
).