mouse button and select the Properties option. Select the Details tab, then select the Spool Settings button. Select the Print directly to the printer option and click on OK.
Again from the Details tab, select the Port Settings button. Deselect the Check port state before printing option and click on OK. See section C for information on printer driver settings and options.
NOTE Before installing updated printer driver versions, always delete the existing printer driver version from your system. To do this, simply select the printer driver icon from within the Printers folder, and press the Delete key.
Windows 3.1x
To install the printer driver into Windows 3.1x, refer to the following:
1.After starting Windows, go to the Main program group and select Control Panel.
2.From the Control Panel, select Printers.
3.Select Use Print Manager from the bottom left of the Printers window.
4.Select the Add>> button.
5.Highlight the Install Unlisted or Updated Printer option from List of Printers.
6.Select the Install button.
7.Insert the supplied Printer Driver diskette into your computerÕs disk drive. If you insert the diskette in a drive other than the A: drive displayed in the Install Driver dialog box, you must change the drive designation. Select the OK button.
8.ÒFARGO FotoFUN!Ó should now be listed in the Add Unlisted or Updated Printer dialog box. Select the OK button. Your PCÕs disk drive will now load the printer driver. Depending upon your computer, loading will take about 10 to 20 seconds.
9.Select the Set As Default Printer button in the Printers window. FotoFUN! has now been selected as your default (main) printer. If you wish to use another printer later, you must
11 Using FotoFUN! for Windows