Section 5: Using FotoFUN! for Macintosh
A. CONNECTING FotoFUN! TO YOUR COMPUTER
FotoFUN! is designed to be used with any Apple Macintosh supporting Color QuickDrawª and running system software
7.0or higher. For best performance, a Macintosh with a 68040 processor and 8Mb of RAM (or higher) or a PowerMac with 8Mb of RAM (or higher) is recommended. The FotoFUN! printer driver is accelerated for use with a PowerMac. FotoFUN! cannot be used with the Macintosh Plus, SE, or Classic since these models do not support Color QuickDraw.
The printer is equipped with a
1.Connect one end of the serial cable to the printer.
2.Connect the other end of the cable to either the Printer or Modem port of your Macintosh.
17 Using FotoFUN! for Macintosh