3.Select either the Modem or Printer Port to indicate to which port the serial interface cable was connected. If the Printer port is selected, AppleTalk should remain inactive while printing with FotoFUN! unless you are using AppleTalk through your Ethernet port. AppleTalk does not apply when printing with the Modem port selected.
4.If you chose to install the Background Print Utility during the installation procedure, select either On or Off to enable or disable FotoFUN!Õs Background Printing function.
When enabled, this function allows you to work in the foreground of your application program while printing in the background. Please refer to Section 6 for more information on background printing.
The next time you open the Chooser, the selected driver will no longer be highlighted. The Chooser, however, remembers which driver is the current one, but does not display it when opened.