Canon FlexTT5, MiniTT1 Mode, not Master or Slave, Trigger normally, Canon ST-E2 in non-ratio mode

Page 12

Basic Wireless E-TTL II: MiniTT1 OOFlexTT5

No Flash on Camera

This simple mode of operation allows you to use one or more remote E-TTL II flashes as one zone of light. All remote E-TTL II flashes will fire at the same power level which is chosen automatically by the camera.

1.Slide the MiniTT1 Transmitter onto the camera and tighten the locking ring.

2.Slide the remote Speedlite onto a FlexTT5 Transceiver, tighten the locking ring, and secure the FlexTT5. Repeat for each remote Speedlite. The remote Speedlites should be set to normal

	mode, not <MASTER> or <SLAVE>.
	mode, not <MASTER> or <SLAVE>.	MiniTT1 on camera shoe
	3. Trigger normally.	MiniTT1 on camera shoe
	3. Trigger normally.
	OPlease read your Canon manuals on Fully
	Automatic Wireless Flash (also called E-TTL II
	Wireless Autoflash).

This mode of operation is the same as using Canon’s wireless system with one of the following directly in the shoe of the camera:

•A Canon ST-E2 in non-ratio mode

•A 580EX (I or II) Speedlite in <MASTER> mode, main flash off, in non-ratio mode.

	Speedlite on FlexTT5 mounted on
12	flash stand

Image 12

Contents MiniTT1/FlexTT5 for Canon Safety Warnings Please pay attention to the following safety warningsCongratulations Table of Contents Table of Contents cont’d Batteries Life expectancy = ~60 hours with alkaline batteriesMiniTT1 and FlexTT5 Key Features MiniTT1 FlexTT5 Read ME First Powering On Canon ST-E2 in non-ratio mode Mode, not Master or SlaveTrigger normally Basic Wireless E-TTL II MiniTT1 OOFlexTT5 cont’d Important The Speedlite in the MiniTT1’s top shoeRatio Wireless E-TTL II MiniTT1 OOFlexTT5 Ratio Wireless E-TTL II MiniTT1 OOFlexTT5 cont’d General E-TTL II ConsiderationsManual Flash Remote SpeedlitesManual Flash cont’d Do not connect a flash to port. You could damageAttempting to connect 2 flashes to the port, or HyperSync & High Speed Sync FP Flash HyperSync & High Speed Sync FP Flash cont’d Download the latest version of the Utility at Use itStatus information Advanced Features via PocketWizard Utility cont’d Channels TTLChannel Tables Learn Mode Learn Mode cont’d Special NotesRemote Camera Triggering As with other PocketWizard radios, the MiniTT1 and FlexTT5FlexTT5 to the remote terminal on the camera Hand held transmitterAuto-Relay Mode Reset Are always reset togetherFlash Idle Time Out Mode = Disabled Turn the radio offGood battery Very low battery change immediatelyStatus LED Mounting Long Range Performance Maintain at least 36 ~ 1 meter distance betweenTroubleshooting Why is my photo not properly exposed?Troubleshooting cont’d Why is my exposure bouncing around?Page Canon Compatibility Flash Units 580EX, 580EX II, 430EX, 430EXOnce camera sleeps, trigger will not work Specifications MiniTT1 FlexTT5Specifications cont’d USBPage FCC wants you to know Make IT Possible