Canon MiniTT1, FlexTT5 owner manual Channel Tables

Page 23

Channel Tables

AMiniTT1 Transmitter or a FlexTT5 Transceiver always transmits on a Standard Channel and a ControlTL Channel for every trigger. Make sure you choose a set of channels/ frequencies that will not interfere with or trigger other PocketWizard users.

When using ControlTL channels 5 through 14, you might interfere with a MultiMAX user on Standard Channels 17 through 26, even if you select a different Standard Channel in the Utility. Check with other users in the area and be sure to select a channel that will not interfere.

ControlTL channels 1-4 are repeated when teaching with a Standard transmitter like the MultiMAX or a Legacy PocketWizard on Standard channels 5 -16. That means if you teach a MiniTT1 or FlexTT5 channel 5 in the field, it will trigger other Control radios listening on ControlTL channel 1.

NOTE: Early Quick Guides refer to “Legacy Channels” instead of Standard channels. They are the same thing.

23

Standard	Standard	ControlTL	ControlTL
Channel	Frequency	Channel	Frequency
1	344.04	1	340
2	344.04	2	345
3	344.04	3	341
4	344.04	4	346
5	344.04	1	340
6	344.04	2	345
7	344.04	3	341
8	344.04	4	346
9	344.04	1	340
10	344.04	2	345
11	344.04	3	341
12	344.04	4	346
13	344.04	1	340
14	344.04	2	345
15	344.04	3	341
16	344.04	4	346
17	346.5	5	346.5
18	347	6	347
19	347.5	7	347.5
20	348	8	348
21	348.5	9	348.5
22	349	10	349
23	349.5	11	349.5
24	350	12	350
25	350.5	13	350.5
26	351	14	351
27	351.5	15	340.5
28	352	16	341.5
29	352.5	17	342
30	353	18	342.5
31	353.5	19	343
32	354	20	345.5

Image 23

Contents MiniTT1/FlexTT5 for Canon Please pay attention to the following safety warnings Safety WarningsCongratulations Table of Contents Table of Contents cont’d Life expectancy = ~60 hours with alkaline batteries BatteriesMiniTT1 and FlexTT5 Key Features MiniTT1 FlexTT5 Read ME First Powering On Trigger normally Canon ST-E2 in non-ratio modeMode, not Master or Slave Important The Speedlite in the MiniTT1’s top shoe Basic Wireless E-TTL II MiniTT1 OOFlexTT5 cont’dRatio Wireless E-TTL II MiniTT1 OOFlexTT5 General E-TTL II Considerations Ratio Wireless E-TTL II MiniTT1 OOFlexTT5 cont’dRemote Speedlites Manual FlashAttempting to connect 2 flashes to the port, or Manual Flash cont’dDo not connect a flash to port. You could damage HyperSync & High Speed Sync FP Flash HyperSync & High Speed Sync FP Flash cont’d Status information Download the latest version of the Utility atUse it Advanced Features via PocketWizard Utility cont’d TTL ChannelsChannel Tables Learn Mode Special Notes Learn Mode cont’dHand held transmitter Remote Camera TriggeringAs with other PocketWizard radios, the MiniTT1 and FlexTT5 FlexTT5 to the remote terminal on the cameraAuto-Relay Mode Turn the radio off ResetAre always reset together Flash Idle Time Out Mode = DisabledStatus LED Good batteryVery low battery change immediately Mounting Maintain at least 36 ~ 1 meter distance between Long Range PerformanceWhy is my photo not properly exposed? TroubleshootingWhy is my exposure bouncing around? Troubleshooting cont’dPage Once camera sleeps, trigger will not work Canon CompatibilityFlash Units 580EX, 580EX II, 430EX, 430EX MiniTT1 FlexTT5 SpecificationsUSB Specifications cont’dPage FCC wants you to know Make IT Possible