Specifications cont’d, Usb | Canon MiniTT1, FlexTT5 specification

Specifications (cont’d)

	MiniTT1	FlexTT5
Camera/P1		Port 1/8” (3.5 mm) stereo miniphone for
		2-stage remote camera triggering.
		Port Voltage Handling: up to 50 Volts,
		100 milliamp continuous
		Tip = Trigger
		Ring = Pre-Trigger
		Sleeve = Ground

Flash/P2 Port		1/8” (3.5 mm) mono miniphone.
		Port Voltage Handling: up to 200 Volts,
		4 amps peak, 250 milliamp continuous,
		non-polarized

Voltage present	3.3 VDC (all pins) - safe for all Canon cameras	3.3 VDC (all pins) - safe for all Canon cameras

Hot Shoe voltage protection	Hot Shoe: up to 50V	Hot Shoe: up to 50V

USB	5VDC regulated, 100mA	5VDC regulated, 100mA
	Pin 1 Positive, Pin 4 Ground	Pin 1 Positive, Pin 4 Ground

Mounting	Hot-shoe	Hot-shoe, 1/4-20, lanyard, Velcro

Construction	High impact plastic, captive battery door.	High impact plastic, captive battery door.
	Hot-shoe made of glass reinforced resin.	Hot-shoe made of glass reinforced resin.

Dimensions	2.8” (7.1 cm) long x 1.9” (4.9 cm)	3.6” (9.2 cm) long x 2.9” (7.3 cm) wide x
	wide x 1.3” (3.3 cm) tall	1.4” (3.6 cm) tall, antenna lowered

Antenna	Internal	2.7” (6.9 cm) rubberized, 180 degree swing

Weight (with batteries)	2.3 oz (65 grams)	5.4 oz (153 grams)
	2.0 oz (57 grams) without battery	3.8 oz (108 grams) without batteries

Operating Temperature	Above -15 C (5 F) and below 50 C (120 F)	Above -15 C (5 F) and below 50 C (120 F)

Storage Temperature	Above -30 C (-22 F) and below 85 C (185 F)	Above -30 C (-22 F) and below 85 C (185 F)
	without batteries	without batteries