Canon G1 manual Using the Built-In Flash, Press the button to switch between, Flash modes

Using the Built-In Flash

Use the built-in flash according to the guidelines below.

(Auto)*	The flash fires automatically as required by the lighting level.
(Red-eye reduction, Auto)	The red-eye reduction lamp always fires but the flash only fires as
	required by the lighting level.
(Red-eye reduction, Flash on)	The red-eye reduction lamp and the flash always fire.
(Flash on)	The flash always fires.
(Flash off)	The flash does not fire.

* No icon appears in the display panel in Auto mode.

1	Press the button to switch between
	flash modes.

•The selected flash mode will show in the display panel. It will also appear on the LCD

monitor if it is on.

2 Shoot the image.

• The flash will fire if the indicator beside the viewfinder shines orange when the shutter button is pressed halfway.

• Shooting procedures are the same as for the Auto mode (p. 37).

Built-in Flash Settings

The flash cannot be used with some shooting modes.

(Auto)

●

●*

●

●

●

●*

-

-

-

-

-

-

(Red-eye reduction,

●*

●

●*

●

●*

●

-

-

-

-

-

-

Auto)

(Red-eye reduction,

-

●

●

●

●

●

-

-

●

●

●

●

Flash on)

(Flash on)

-

●

●

●

●

●

▲

-

●

●

●

●

(Flash off)

●

●

●

●*

●

●

▲*

●*

●*

●*

●*

●*

* Default setting.

●Setting selection is possible.

▲Setting can only be selected for the first image. - Setting selection is not possible.

Shooting - Letting the Camera Select Settings 41