Save bar code on the Programming Chart inside the back cover of this manual. Default = 1.

Number of Error Beeps/LED Flashes

LED Settings

Disabled Scanner LED Flash

When the scanner is disabled by the POS system, the LEDs can be set to flash by scanning LED Flash On. If you do not want the LEDs to flash, scan LED Flash Off. Default = LED Flash On.

LED Flash Off

* LED Flash On

Bar Code Scanning Delays

Reread Delay

This sets the time period before the Stratos bioptic scanner can read the same bar code a second time. Setting a reread delay protects against accidental rereads of the same bar code. Longer delays are effective in minimizing accidental rereads. Use shorter delays in applications where repetitive bar code scanning is required. These settings apply to both

1D and 2D bar codes unless the 2D Reread Delay (page 4-13)is set. Default = Short.

Very Short (400 ms)

* Short (500 ms)

Medium (750 ms)

4 - 12

Page 84
Image 84
Honeywell 2700 manual LED Settings, Bar Code Scanning Delays, Disabled Scanner LED Flash, Reread Delay