Programming Chart inside the back cover, then scanning Save. Default = 4000 ms, which is 4 seconds.

Note: If the EAS tag has not been deactivated in this time period, the operator can deactivate it using the F1 button. See EAS Function on page 4-5to program this functionality.

EAS Interlocked Duration

Timeout

EAS Tag Detection

When On is scanned, the scanner makes a Geiger counter sound when an EAS tag is detected. Scan the Off bar code(s) if you

don’t want the scanner to make this sound. Default = EAS Tag Detection Off.

* EAS Tag Detection Off

EAS Tag Detection On

Note: To set the scanner to chirp when an EAS tag is deactivated, refer to Beep on EAS Deactivation on page 4-11.

10 - 6

Page 210
Image 210
Honeywell 2700 manual EAS Tag Detection