the Programming Chart on the inside the back cover of this manual. The data characters should then appear properly.

Code 39 Code Page

Interleaved 2 of 5

Default All Interleaved 2 of 5 Settings

Interleaved 2 of 5 On/Off

On

* Off

NULL Characters

Interleaved 2 of 5 requires an even number of characters. When an odd number of characters is present, it is due to NULL characters embedded in the bar code. Scan the On bar code below to decode this type of Interleaved 2 of 5 bar code.

Default = Off.

* Off

On

Check Digit

No Check Digit indicates that the scanner reads and transmits bar code data with or without a check digit.

When Check Digit is set to Validate, but Don’t Transmit, the unit only reads Interleaved 2 of 5 bar codes printed with a check digit, but will not transmit the check digit with the scanned data.

9 - 8

Page 138
Image 138
Honeywell 2700 manual Interleaved 2 of 5 On/Off, Null Characters, Check Digit