Honeywell 2700 manual Beep on BEL Character, Good Read Indicators, Beeper Good Read

the Programming Chart inside the back cover, then scanning Save. Default = 50.

JPEG Image Quality

Beep on BEL Character

You may wish to force the scanner to beep upon a command sent from the host. If you scan the Beep on BEL On bar code below, the scanner will beep every time a BEL character is received from the host. Default = Beep on BEL Off.

*Beep on BEL Off

Beep on BEL On

Good Read Indicators

Beeper – Good Read

The beeper may be programmed On or Off in response to a good read. Turning this option off, only turns off the beeper response to a good read indication. All error and menu beeps are still audible. Default = Beeper - Good Read On.

Note: Also see Good Read Beep - Aux Scanner (page 5-2)to set which device emits the good read beep.

Beeper - Good Read Off

* Beeper - Good Read On

4 - 8