Validate Type 10 then Type 11

Character, but Don’t Transmit

Validate Type 10 then

Type 11 Character and Transmit

Disable MSI Check Characters

MSI Redundancy

If you are encountering errors when reading MSI bar codes, you may want to adjust the redundancy count. Redundancy adjusts the number of times a bar code is decoded before transmission, which may reduce the number of errors. Note that the higher the redundancy count, the longer it will take to decode the bar code. To adjust the redundancy, scan the MSI Redundancy bar code below, then scan a redundancy count between 0 and 10 on the Programming Chart inside the back cover of this manual. Then scan the Save bar code. Default = 0.

MSI Redundancy

MSI Message Length

Scan the bar codes below to change the message length. Refer to Message Length Description (page 9-1)for additional

information. Minimum and Maximum lengths = 1-80. Minimum Default = 3, Maximum Default = 80.

Minimum Message Length

Maximum Message Length

9 - 54

Page 184
Image 184
Honeywell 2700 manual MSI Redundancy, MSI Message Length