Honeywell 2700 manual HSTXRC0, HSTXRC1, HSTXRC2 CRC HSTXRC3, Dlychr##, Dlycrx##, Dlyxx##, Dlyfnc##

Selection	Setting	Serial Command	Page
		# Indicates a numeric
	* Indicates default
		entry
Communication Check Character	*None	HSTXRC0	7-5
	LRC Starts on 1st Character	HSTXRC1	7-5
	LRC Starts on 2nd Character	HSTXRC2	7-5
	CRC	HSTXRC3	7-5
Intercharacter Delay	Range 0 - 65535 (1ms increments)	DLYCHR##	7-5
User Specified	Delay Length	DLYCRX##	7-6
Intercharacter Delay	Range 0 - 65535 (1ms increments)
	Character to Trigger Delay	DLY_XX##	7-6
Interfunction Delay	Range 0 - 65535 (1ms increments)	DLYFNC##	7-6
Intermessage Delay	Range 0 - 65535 (1ms increments)	DLYMSG##	7-6
Data Formatter Selections
Data Format Editor	*Default Data Format (None)	DFMDF3	8-1
	Enter Data Format	DFMBK3##	8-2
	Clear One Data Format	DFMCL3	8-2
	Clear All Data Formats	DFMCA3	8-2
Data Formatter	Data Formatter Off	DFM_EN0	8-11
	*Data Formatter On,	DFM_EN1	8-12
	Not Required,
	Keep Prefix/Suffix
	Data Format Required,	DFM_EN2	8-12
	Keep Prefix/Suffix
	Data Formatter On,	DFM_EN3	8-12
	Not Required,
	Drop Prefix/Suffix
	Data Format Required,	DFM_EN4	8-12
	Drop Prefix/Suffix
Data Format Non-Match Error Tone	*Data Format Non-Match Error Tone On	DFMDEC0	8-12
	Data Format Non-Match Error Tone Off	DFMDEC1	8-12
Primary/Alternate Data Formats	Primary Data Format	ALTFNM0	8-13
	Data Format 1	ALTFNM1	8-13
	Data Format 2	ALTFNM2	8-13
	Data Format 3	ALTFNM3	8-13
Single Scan Data Format Change	Single Scan-Primary	VSAF_0	8-13
	Data Format
	Single Scan-Data Format 1	VSAF_1	8-13
	Single Scan-Data Format 2	VSAF_2	8-13
	Single Scan-Data Format 3	VSAF_3	8-13
Symbologies
All Symbologies	All Symbologies Off	ALLENA0	9-1
	All Symbologies On	ALLENA1	9-1
Codabar	Default All Codabar	CBRDFT	9-2
	Settings
	*Off	CBRENA0	9-2
	On	CBRENA1	9-2

13 - 13