Honeywell 2700 manual Programming the EAS Interface, Cable

settings should be tuned according to your particular installation.

Using a 2 ft	SW2
(.61m) cable	On
Part #52-52511
	1	2	3	4	5	6
	SW1
	On
	1	2	3	4	5	6
Using a 6 ft	SW2
(1.83m) cable	On
Part #52-52556
	1	2	3	4	5	6
	SW1
	On
	1	2	3	4	5	6
	Cable				EAS Detection Volume
		Width				Height	Depth
	2 ft (.61m)
	#52-52511	11 in. (27.94cm)				6.75 in. (17.15cm)	10 in. (25.4cm)
	6 ft (1.83m)
	#52-52556	9.5 in. (24.13cm)				5 in. (12.7cm)	10 in. (25.4cm)

Programming the EAS Interface

Scan one of the following bar codes to program the EAS Interface. The EAS Interfaces all work in interlocked mode (see EAS

Mode of Operation on page 10-5).

GPIO Checkpoint

10 - 3