
USB - IBM SurePos
Scan one of the following “Plug and Play” codes to program the scanner for an IBM SurePos (USB handheld scanner) or IBM SurePos (USB tabletop scanner) interface.
Note: After scanning one of these codes, you must power cycle the cash register.
USB IBM SurePos
(USB Handheld Scanner)
Interface
USB IBM SurePos
(USB Tabletop Scanner)
Interface
Each bar code above also programs the following suffixes for each symbology:
Symbology | Suffix | Symbology | Suffix |
| |
|
|
|
|
|
|
EAN 8 | 0C | Code 39 | 00 | 0A | 0B |
EAN 13 | 16 | Interleaved 2 of 5 | 00 | 0D 0B | |
UPC A | 0D | Code 128 | 00 | 18 | 0B |
UPC E | 0A | Code 39 | 00 | 0A | 0B |
NCR Host System Scanner Only - Dual Cable
Scan the following bar code to place the scanner in dual cable mode. In a dual cable environment, the scanner and scale work independently. In this mode, the host must have a dedicated RS232 port to receive the scale data and the bar code data is sent via its own cable to a separate communication port. The following bar code programs a carriage return (CR) suffix, NCR Code IDs, baud rate, and data format as indicated below.
Option | Setting |
Baud Rate | 9,600 bps |
Data Format | 8 data bits, no parity bit, 1 stop bit |
NCR Scanner Only - Dual Cable
3 - 8