Honeywell 2700 IDMAPP1, IDMAPP0, Maxdft MAXENA1, MAXENA0, Maxmin, Maxmax, Aztdft AZTENA1, AZTENA0

Selection	Setting	Serial Command	Page
		# Indicates a numeric
	* Indicates default
		entry
Data Matrix Append	*On	IDMAPP1	9-70
	Off	IDMAPP0	9-70
MaxiCode	Default All MaxiCode Settings	MAXDFT	9-70
	On	MAXENA1	9-70
	*Off	MAXENA0	9-70
MaxiCode Msg. Length	Minimum (1-150) *1	MAXMIN	9-70
	Maximum (1-150) *150	MAXMAX	9-71
Aztec Code	Default All Aztec Code Settings	AZTDFT	9-71
	*On	AZTENA1	9-71
	Off	AZTENA0	9-71
Aztec Code Msg. Length	Minimum (1-3832) *1	AZTMIN	9-71
	Maximum (1-3832) *3832	AZTMAX	9-71
Aztec Append	*On	AZTAPP1	9-72
	Off	AZTAPP0	9-72
Chinese Sensible (Han Xin) Code	Default All Han Xin Code Settings	HX_DFT	9-72
	On	HX_ENA1	9-72
	*Off	HX_ENA0	9-72
Chinese Sensible (Han Xin) Code Msg.	Minimum (1-7833) *1	HX_MIN	9-72
Length
	Maximum (1-7833) *7833	HX_MAX	9-73
EAS Settings
Programming the EAS Interface	GPIO Checkpoint	PAPCP1	10-3
	GPIO Sensormatic	PAPSM1	10-3
	RS232 Sensormatic	PAPSM2	10-3
EAS Controller	*Off	EASTYP0	10-4
	Checkpoint Systems	EASTYP2	10-4
	NEDAP	EASTYP3	10-4
	Gateway Security	EASTYP4	10-4
	Sensormatic AMB9010	EASTYP1	10-4
	Sensormatic ScanMaxPro	EASTYP5	10-4
EAS Interface	*GPIO	EASINF0	10-5
	RS232	EASINF1	10-5
	USB	EASINF2	10-5
EAS Mode of Operation	*Interlocked	EASMOD0	10-5
	Continuous on Enable	EASMOD1	10-5
	Continuous	EASMOD2	10-5
EAS Interlocked Duration Timeout	EASTIM (0 - 65535) *4000 ms	EASTIM#####	10-5
EAS Tag Detection	* EAS Tag Detection Off	EASGGR0	10-6
	EAS Tag Detection On	EASGGR0	10-6
Utilities
	Add Code I.D. Prefix to	PRECA2;PREBK2	12-1
	All Symbologies (Temporary)	995C80!
	Show Software Revision	REVINF	12-1

13 - 24