6

Scale

Programming the Scale Interface

RS232

OPOS - Single Cable

Scan the following programming codes to set up the scanner/scale using the OPOS drivers when connected via a sin- gle RS232 cable.

Baud Rate/Parity sets the baud rate to 9600 bps and the data format to 8 data bits, no parity, 1 stop bit.

Single Cable configures the Stratos bioptic for a scale interface.

External Scale Display configures the Stratos bioptic for an external display. If you do not have an external display,

you do not need to scan the External Scale Display code.

Baud Rate/Parity

Single Cable

External Scale Display

NCR Protocol - Single Cable

Scan one of the following bar codes to set up the scanner/scale for an NCR Communication Protocol (Retalix Storeline and LOC SMS POS application software) when connected via a single RS232 cable. This also sets the baud rate to 9600 bps and the data format to 8 data bits, no parity, 1 stop bit. Select the appropriate code for either kilograms or

pounds.

NCR Protocol English (lbs)

Single Cable

NCR Protocol Metric (kg)

Single Cable

6 - 1

Page 97
Image 97
Honeywell 2700 manual Programming the Scale Interface, RS232, Opos Single Cable, NCR Protocol Single Cable