* Off

Coupon GS1 DataBar Output

If you scan coupons that have both UPC and GS1 DataBar codes, you may wish to scan and output only the data from the GS1 DataBar code. Scan the GS1 Output On code below to scan and output only the GS1 DataBar code data. Default =

GS1 Output Off.

* GS1 Output Off

GS1 Output On

In-Store Printed Bar Codes

In-store UPC and EAN bar codes are sometimes haphazardly printed, resulting in poor quality codes. The decoding of in- store bar codes may need some adjustment to improve read rates. The following settings allow you to make fine adjust- ments to the way the decoder interprets the bar code data from in-store printed UPC and EAN bar codes.

Stitching

Stitching controls the decoding security for in-store UPC and EAN bar codes. If you are having difficulty reading poor quality in-store bar codes, you may wish to scan the Stitching Off bar code below to improve the read rate. Default =

Stitching On.

* Stitching On

Stitching Off

9 - 60

Page 190
Image 190
Honeywell 2700 manual Coupon GS1 DataBar Output, In-Store Printed Bar Codes, Stitching