Coupon Code Settings

GS1 DataBar Expanded Coupons With AI (8110)

This selection lets you control reading GS1 DataBar Expanded coupon codes that have an application identifier (AI) of 8110. When On is scanned, GS1 DataBar Expanded coupon codes that have an AI of 8110 are read. When Off is

scanned, GS1 DataBar Expanded coupon codes with AI (8110) are not read. Default = Off.

On

* Off

GS1 DataBar Expanded Coupons Without AI (8110)

This selection lets you control reading GS1 DataBar Expanded coupon codes that do not have an application identifier (AI) of 8110. When On is scanned, GS1 DataBar Expanded coupon codes that do not have an AI of 8110 are read. When Off

is scanned, GS1 DataBar Expanded coupon codes without AI (8110) are not read. Default = Off.

On

* Off

GS1 DataBar Expanded Coupon Preferred Mode

This selection allows you to set a scanning preference for GS1 DataBar Expanded Coupons With AI (8110) over UPC/EAN bar codes. When On is selected and an item is scanned that has both a GS1 DataBar Expanded coupon code with AI (8110) as well as a UPC or EAN bar code, the scanner will transmit the coupon code data. If no coupon code is found, then the UPC or EAN code data is sent. The scanner searches for the coupon code for the length of time set for the Addenda

Timeout, page 9-47.When Off is selected, both bar codes are sent independently. Default = Off.

On

9 - 59

Page 189
Image 189
Honeywell 2700 manual Coupon Code Settings, GS1 DataBar Expanded Coupons With AI, GS1 DataBar Expanded Coupons Without AI