Honeywell 2700 manual

Selection		Setting	Serial Command	Page
			# Indicates a numeric
		* Indicates default
			entry
NEC 2 of 5		Default All NEC	N25DFT	9-10
		2 of 5 Settings
		*Off	N25ENA0	9-10
		On	N25ENA1	9-10
NEC 2 of 5 Check Digit		*No Check Char.	N25CK20	9-10
		Validate, But Don’t	N25CK21	9-10
		Transmit
		Validate, and Transmit	N25CK22	9-10
NEC 2 of 5 Redundancy		Range (0 - 10) *0	N25VOT##	9-11
NEC 2 of 5 Message Length		Minimum (1 - 80) *6	N25MIN##	9-11
		Maximum (1 - 80) *80	N25MAX##	9-11
Code 93		Default All Code 93	C93DFT	9-11
		Settings
		*Off	C93ENA0	9-11
		On	C93ENA1	9-11
Code 93 Redundancy		Range (0 - 10) *0	C93VOT##	9-12
Code 93 Message Length		Minimum (1 - 80) *3	C93MIN##	9-12
		Maximum (1 - 80) *80	C93MAX##	9-12
Code 93 Code Page		Code 93 Code Page	C93DCP	9-12
Straight 2 of 5 Industrial		Default All Straight 2 of 5 Industrial Settings	R25DFT	9-13
		*Off	R25ENA0	9-13
		On	R25ENA1	9-13
Straight 2 of 5 Industrial Redundancy		Range (0 - 10) *0	R25VOT##	9-13
Straight 2 of 5 Industrial Message Length		Minimum (1 - 80) *6	R25MIN##	9-13
		Maximum (1 - 80) *80	R25MAX##	9-13
Straight	2 of 5 IATA	Default All Straight 2 of 5 IATA	A25DFT	9-14
		Settings
Straight	2 of 5 IATA	*Off	A25ENA0	9-14
		On	A25ENA1	9-14
Straight 2 of 5 IATA Redundancy		Range (0 - 10) *0	A25VOT##	9-14
Straight 2 of 5 IATA Message Length		Minimum (1 - 80) *6	A25MIN##	9-14
		Maximum (1 - 80) *15	A25MAX##	9-14
Matrix 2 of 5		Default All Matrix 2 of 5	X25DFT	9-15
		Settings
		*Off	X25ENA0	9-15
		On	X25ENA1	9-15
Matrix 2 of 5 Check Digit		*No Check Digit	X25CK20	9-15
		Validate, But Don’t	X25CK21	9-15
		Transmit
		Validate, and Transmit	X25CK22	9-15
Matrix 2 of 5 Redundancy		Range (0 - 10) *0	X25VOT##	9-16
Matrix 2 of 5 Message Length		Minimum (1 - 80) *6	X25MIN##	9-16
		Maximum (1 - 80) *80	X25MAX##	9-16

13 - 15