Honeywell 2700 manual No Read, Default = Off

When the output sequence is Off, the bar code data is output to the host as the scanner decodes it. Default = Off.

Required

On/Not Required

*Off

No Read

With No Read turned On, the scanner notifies you if a code cannot be read. If using an EZConfig-Scanning Tool Scan Data Window (see page 12-2), an “NR” appears when a code cannot be read. If No Read is turned Off, the “NR” will not appear.

Default = Off.

On

* Off

If you want a different notation than “NR,” for example, “Error,” or “Bad Code,” you can edit the output message (see Data Formatting beginning on page 8-1). The hex code for the No Read symbol is 9C.

4 - 20