Canon SBOEX instruction manual Using E-TTL II and E·TTL Autoflash in the Shooting Modes

Page 12

Using E-TTL II and E·TTL Autoflash in the Shooting Modes Ii

Just set the camera'sshooting mode to <Av> (aperture-priority AE), <Tv> (shutter-priority AE), or <M> (manual) and you can use E-TTL II/E-TTL autoflash.

Tv

..

I

Av

Select this mode when you want to set the shutter speed manually.

The camera will then automatically set the aperture matching the shutter speed to obtain a standard exposure.

@If the aperture display blinks, it means that the background exposure will be underexposed or overexposed. Adjust the shutter speed until the aperture display stops blinking.

Select this mode when you want to set the aperture manually.

The camera will then automatically set the shutter speed matching the aperture to obtain a standard exposure.

If the background is dark like a night scene, a slow sync speed will be used to obtain a standard exposure of both the main subject and background. Standard exposure of the main subject is obtained with the flash, while a standard exposure of the background is obtained with a slow shutter speed.

eSince a slow shutter speed will be used for low-light scenes, using a tripod is

recommended.

$ If the shutter speed display blinks, it means that the background exposure will be underexposed or overexposed. Adjust the aperture until the shutter speed display stops blinking.

Select this mode when you want to set both the shutter speed and aperture manually. M Standard exposure of the main subject is obtained with the flash. The exposure of the

background is obtained with the shutter speed and aperture combination you set.

$ If you use the <DEP> or <A-DEP >shooting mode, the result will be the same as using the <P> (Program AE) mode.

Flash Sync Speeds and Apertures Use

 

Shutter SPE!E!cJ§E!tting

Aperture Setting

p

Automatic (1/60 sec. - 1/X sec.)

Automatic

Tv

Manual (30 sec. - 1/X sec.)

Automatic

Av

Automatic (30 sec. - 1/X sec.)

Manual

M

Manual (bulb, 30 sec. - 1/X sec.)

Manual

o 1/X sec. is the camera'smaximum flash sync speed.

12

Image 12
Contents Sboex Thank you for purchasing a Canon product Contents Nomenclature Push ~TLI Using E-TTL II and E-TTL Autoflash Shooting Modes Fully Automatic Flash ShootingInstalling Batteries Install the batteriesOpen the cover Close the coverWireless Selector Settings Attaching to the Camera~t Loosen the locking ring Attach it to the cameraTurn on the Power Switch @E~~Z6OJ~-~~1 Set the power switch to onAbout Auto Power Off Check that the flash is readyFully Automatic Flash Shooting Zoom SOmm 1 Set the Speedlite to ETTlUsing E-TTL II and E·TTL Autoflash in the Shooting Modes Using Flash ~ Flash Exposure Compensation Press the ~ button~ FEB Flash Exposure Bracketing ii&W Set the flash exposure bracketing amountPress the @ button FE L FE Lock Focus the subject Press the FE L button~ High-Speed Sync FP Flash ~ is displayedBounce Flash Set the Bounce DirectionCreating a Catchlight Point the flash head upward by Pull out the wide panelPush in the wide panel Closeup Flash ShootingUsing the Wide Panel Press the ZOOM/~ buttonEttl Press the Mode button so that Manual FlashIs displayed Set the flash outputDisplayed Flash Output Figures Figures for decreased flash output -+Multi Stroboscopic Flash Max. Stroboscopic Flashes ~ Second-Curtain Sync Press the ~H/~ button so that~ is displayed Fn Setting Custom Functions Change the settingCustom Function Settings Custom Setting FUItinPage Page Wireless Flash About Wireless Flash Basic Wireless Settings & SetupMulti-Speedlite, Wireless Lighting Configurations Wireless flash with two slave groups p.38Wireless flash with three slave groups pAO Fully Automatic Wireless Flash Check the flash operation Set the camera and shootDisable the master unitsflash firing Master UnitsFlash ON/OFFPress the ZOOM/~ button so That the display blinks as shown onUsing Fully Automatic Wireless Flash Setting Communication ChannelPress the ZOOM/~ button so that ~ blinks Set the channel No Set the wireless selector to Flash Ratio with E-TTLSet the Slave Unit Press the ZOOM/~ button so That ~ blinksMASTER. p.34 Wireless Flash with Three Slave Groups Set the slave unitsSet the master unit and shoot Modeling FlashAbout Slave Group Control Wireless Manual Flash with Varied Flash Output Set the flash outputManual Flash Stroboscopic FlashPage Reference 580EX System Speedlite 580EX On-camera/Master unitAbout Color Temperature Information Transmission Reverting to 580EX Default SettingsAbout the AF-Assist Beam Troubleshooting Flash range scale bars blink Major Specifications ....i..,Si.~ TypeCustom Functions Guide No. GNo. ISO 100, in meters/feet Normal Flash Full Output and Quick Flash GNoUsing a Type-B Camera -~Jt~d1lllll1llL Page Page Canon Canon Call0ll Canon !\UIlfJlJi!l~n&~pilJ