Canon SBOEX instruction manual Master UnitsFlash ON/OFF, Press the ZOOM/~ button so, Left

Page 36

!lJ is

1!l'

;@>

The Speedlite'szoom setting will be set automatically to 24mm. It is possible to change the master unit'szoom setting. However, note that the master unit transmits wireless signals to the slave unit(s) with the preflash. Therefore, the flash coverage must cover the slave unit'sposition. If you change the master unit'szoom setting, be sure to test the wireless operation before shooting.

If the slave unit enters auto power off, it can be turned on again by pressing the master unit'stest firing button.

A test flash cannot be fired while the camera'soperation timer 04 or 06 is active.

Master Unit'sFlash ON/OFF

You can disable the master unit from firing during actual exposure so that only the slave unit(s) will fire in the final picture.

ETTL 1m Zoom ,2Ymm

i Press the <ZOOM/~> button so

I

that the display blinks as shown on

,1/

-"on'"-

 

-::8

~ I"

 

the left.

/"1~'11

 

Disable the master unit'sflash firing.

iiji Turn the <@> dial to select <0 FF>, then press the <@> button.

t»> The < .....2> icon will blink.

ETTL 1m Zoom 2Ymm

,I~-­-"z.-~ 1

-- "T' -------

!lJ Even if you disable the master unit'sflash firing, it will still fire a preflash to transmit wireless signals.

36

Image 36
Contents Sboex Thank you for purchasing a Canon product Contents Nomenclature Push ~TLI Using E-TTL II and E-TTL Autoflash Shooting Modes Fully Automatic Flash ShootingInstalling Batteries Install the batteriesOpen the cover Close the coverWireless Selector Settings Attaching to the Camera~t Loosen the locking ring Attach it to the cameraTurn on the Power Switch @E~~Z6OJ~-~~1 Set the power switch to onAbout Auto Power Off Check that the flash is readyFully Automatic Flash Shooting Zoom SOmm 1 Set the Speedlite to ETTlUsing E-TTL II and E·TTL Autoflash in the Shooting Modes Using Flash ~ Flash Exposure Compensation Press the ~ button~ FEB Flash Exposure Bracketing ii&W Set the flash exposure bracketing amountPress the @ button FE L FE Lock Focus the subject Press the FE L button~ High-Speed Sync FP Flash ~ is displayedBounce Flash Set the Bounce DirectionCreating a Catchlight Point the flash head upward by Pull out the wide panelPush in the wide panel Closeup Flash ShootingUsing the Wide Panel Press the ZOOM/~ buttonEttl Press the Mode button so that Manual FlashIs displayed Set the flash outputDisplayed Flash Output Figures Figures for decreased flash output -+Multi Stroboscopic Flash Max. Stroboscopic Flashes ~ Second-Curtain Sync Press the ~H/~ button so that~ is displayed Fn Setting Custom Functions Change the settingCustom Function Settings Custom Setting FUItinPage Page Wireless Flash About Wireless Flash Basic Wireless Settings & SetupMulti-Speedlite, Wireless Lighting Configurations Wireless flash with two slave groups p.38Wireless flash with three slave groups pAO Fully Automatic Wireless Flash Check the flash operation Set the camera and shootDisable the master unitsflash firing Master UnitsFlash ON/OFFPress the ZOOM/~ button so That the display blinks as shown onUsing Fully Automatic Wireless Flash Setting Communication ChannelPress the ZOOM/~ button so that ~ blinks Set the channel No Set the wireless selector to Flash Ratio with E-TTLSet the Slave Unit Press the ZOOM/~ button so That ~ blinksMASTER. p.34 Wireless Flash with Three Slave Groups Set the slave unitsSet the master unit and shoot Modeling FlashAbout Slave Group Control Wireless Manual Flash with Varied Flash Output Set the flash outputManual Flash Stroboscopic FlashPage Reference 580EX System Speedlite 580EX On-camera/Master unitAbout Color Temperature Information Transmission Reverting to 580EX Default SettingsAbout the AF-Assist Beam Troubleshooting Flash range scale bars blink Major Specifications ....i..,Si.~ TypeCustom Functions Guide No. GNo. ISO 100, in meters/feet Normal Flash Full Output and Quick Flash GNoUsing a Type-B Camera -~Jt~d1lllll1llL Page Page Canon Canon Call0ll Canon !\UIlfJlJi!l~n&~pilJ