Canon SBOEX Creating a Catchlight, Point the flash head upward by Pull out the wide panel

Page 19

Creating a Catchlight

With the catchlight panel, you can create a catchlight in the subject'seyes to add life to the facial expression.

1 Point the flash head upward by 90°.

(I

Pull out the wide panel.

l? The catchlight panel will come out at the same time.

Push in the wide panel.

#P Push in only the wide panel.

~Follow the same procedure as for bounce flash.

U @ Point the flash head straight ahead and then upward by 900 The catchlight will not work if you swing the flash head left or right.

*' For maximum catchlight effect, stay within 1.5 m/4.9 ft of the SUbject.

Closeup Flash Shooting

If you want to shoot a subject about 0.5 - 2 m (1.6 - 6.6 ft) away, hold down the <PUSH> button and tilt the flash head downward by 7°.

ETTL

Zoom 5Dmm

"

I ,

F- S.b

-

IE)

 

1-

 

0.5 ---0.7 1 1.5(2"314,------,;\~1318 m

--- /

1',\ \-'7,.-

19

Image 19
Contents Sboex Thank you for purchasing a Canon product Contents Nomenclature Push ~TLI Fully Automatic Flash Shooting Using E-TTL II and E-TTL Autoflash Shooting ModesClose the cover Installing BatteriesInstall the batteries Open the coverAttach it to the camera Wireless Selector SettingsAttaching to the Camera ~t Loosen the locking ringCheck that the flash is ready Turn on the Power Switch@E~~Z6OJ~-~~1 Set the power switch to on About Auto Power OffZoom SOmm 1 Set the Speedlite to ETTl Fully Automatic Flash ShootingUsing E-TTL II and E·TTL Autoflash in the Shooting Modes Using Flash Press the ~ button ~ Flash Exposure CompensationSet the flash exposure bracketing amount ~ FEB Flash Exposure Bracketing ii&WPress the @ button Focus the subject Press the FE L button FE L FE Lock~ is displayed ~ High-Speed Sync FP FlashSet the Bounce Direction Bounce FlashCloseup Flash Shooting Creating a CatchlightPoint the flash head upward by Pull out the wide panel Push in the wide panelPress the ZOOM/~ button Using the Wide PanelEttl Set the flash output Press the Mode button so thatManual Flash Is displayedFigures for decreased flash output -+ Displayed Flash Output FiguresMulti Stroboscopic Flash Max. Stroboscopic Flashes Press the ~H/~ button so that ~ Second-Curtain Sync~ is displayed Change the setting Fn Setting Custom FunctionsCustom Setting FUItin Custom Function SettingsPage Page Wireless Flash Basic Wireless Settings & Setup About Wireless FlashWireless flash with two slave groups p.38 Multi-Speedlite, Wireless Lighting ConfigurationsWireless flash with three slave groups pAO Fully Automatic Wireless Flash Set the camera and shoot Check the flash operationThat the display blinks as shown on Disable the master unitsflash firingMaster UnitsFlash ON/OFF Press the ZOOM/~ button soSetting Communication Channel Using Fully Automatic Wireless FlashPress the ZOOM/~ button so that ~ blinks Set the channel No Press the ZOOM/~ button so That ~ blinks Set the wireless selector toFlash Ratio with E-TTL Set the Slave UnitMASTER. p.34 Set the slave units Wireless Flash with Three Slave GroupsModeling Flash Set the master unit and shootAbout Slave Group Control Set the flash output Wireless Manual Flash with Varied Flash OutputStroboscopic Flash Manual FlashPage Reference Speedlite 580EX On-camera/Master unit 580EX SystemReverting to 580EX Default Settings About Color Temperature Information TransmissionAbout the AF-Assist Beam Troubleshooting Flash range scale bars blink Type Major Specifications ....i..,Si.~Custom Functions Normal Flash Full Output and Quick Flash GNo Guide No. GNo. ISO 100, in meters/feetUsing a Type-B Camera -~Jt~d1lllll1llL Page Page Canon Canon Call0ll Canon !\UIlfJlJi!l~n&~pilJ