Setting Manual Flash and Stroboscopic Flash with the Slave Unit II
Manual flash or stroboscopic flash can be set manually with the slave unit. Do this in the following cases:
(1)When you want to set the flash output with the slave units individually for wireless or manual flash, as with studio flash units.
(2)When you use Speedlite Transmitter
Manual Flash
| mJ Zoom 2Ymm | |
~- | 1/ | 16 |
IK) - = - EDa | ||
I | Z ... 1 |
|
1@ Press the <MODE> button for 2 sec.
~< M> will blink.
@) Set the manual flash output (p.22).
Stroboscopic Flash
mJ Zoom 2'-1mm
.... I... 1/128 :5- 'lDHz
~, .... Z ... 1
~Press the <MODE> button for 2 sec.
~<M> will blink.
i89 Press the <MODE> button again and <MULTI> will blink.
~Set the stroboscopic flash (p.24).
43