Canon SBOEX instruction manual Flash range scale bars blink

Page 49

The flash range scale bars blink.

1$' The flash head has been tilted down by 7°.

Change the bounce position. (p.i9)

The periphery or bottom of the picture looks dark.

When you set the flash coverage manually, the setting was a higher number than the lens focal length, resulting in a dark periphery.

Set the flash coverage that is a lower number than the lens focal length or set it to auto zoom. (p.20)

If only the bottom of the picture looks dark, you were too close to the subject.

If the subject is closer than 2 m/6.6 ft, tilt the flash head downward by 7°. (p.i9)

The flash exposure is underexposed or overexposed.

There was a highly reflective object (glass window, etc.) in the picture.

Use FE lock. (p.i6)

The subject has a very dark or light color.

Set flash exposure compensation. For a dark subject, set a decreased flash exposure. And for a bright subject, set an increased flash exposure. (p.14)

You used high-speed sync.

With high-speed sync, the effective flash range will be shorter. Make sure the subject is within the effective flash range displayed. (p.i7)

The picture is really blurred.

The shooting mode was set to < Av >, and the scene was dark.

Use a tripod or set the shooting mode to < P >. (p.i2)

49

Image 49
Contents Sboex Thank you for purchasing a Canon product Contents Nomenclature Push ~TLI Fully Automatic Flash Shooting Using E-TTL II and E-TTL Autoflash Shooting ModesInstall the batteries Installing BatteriesOpen the cover Close the coverAttaching to the Camera Wireless Selector Settings~t Loosen the locking ring Attach it to the camera@E~~Z6OJ~-~~1 Set the power switch to on Turn on the Power SwitchAbout Auto Power Off Check that the flash is readyZoom SOmm 1 Set the Speedlite to ETTl Fully Automatic Flash ShootingUsing E-TTL II and E·TTL Autoflash in the Shooting Modes Using Flash Press the ~ button ~ Flash Exposure CompensationSet the flash exposure bracketing amount ~ FEB Flash Exposure Bracketing ii&WPress the @ button Focus the subject Press the FE L button FE L FE Lock~ is displayed ~ High-Speed Sync FP FlashSet the Bounce Direction Bounce FlashPoint the flash head upward by Pull out the wide panel Creating a CatchlightPush in the wide panel Closeup Flash ShootingPress the ZOOM/~ button Using the Wide PanelEttl Manual Flash Press the Mode button so thatIs displayed Set the flash outputFigures for decreased flash output -+ Displayed Flash Output FiguresMulti Stroboscopic Flash Max. Stroboscopic Flashes Press the ~H/~ button so that ~ Second-Curtain Sync~ is displayed Change the setting Fn Setting Custom FunctionsCustom Setting FUItin Custom Function SettingsPage Page Wireless Flash Basic Wireless Settings & Setup About Wireless FlashWireless flash with two slave groups p.38 Multi-Speedlite, Wireless Lighting ConfigurationsWireless flash with three slave groups pAO Fully Automatic Wireless Flash Set the camera and shoot Check the flash operationMaster UnitsFlash ON/OFF Disable the master unitsflash firingPress the ZOOM/~ button so That the display blinks as shown onSetting Communication Channel Using Fully Automatic Wireless FlashPress the ZOOM/~ button so that ~ blinks Set the channel No Flash Ratio with E-TTL Set the wireless selector toSet the Slave Unit Press the ZOOM/~ button so That ~ blinksMASTER. p.34 Set the slave units Wireless Flash with Three Slave GroupsModeling Flash Set the master unit and shootAbout Slave Group Control Set the flash output Wireless Manual Flash with Varied Flash OutputStroboscopic Flash Manual FlashPage Reference Speedlite 580EX On-camera/Master unit 580EX SystemReverting to 580EX Default Settings About Color Temperature Information TransmissionAbout the AF-Assist Beam Troubleshooting Flash range scale bars blink Type Major Specifications ....i..,Si.~Custom Functions Normal Flash Full Output and Quick Flash GNo Guide No. GNo. ISO 100, in meters/feetUsing a Type-B Camera -~Jt~d1lllll1llL Page Page Canon Canon Call0ll Canon !\UIlfJlJi!l~n&~pilJ