Canon ELAN7NE-33V Checking the Battery Level, Turn the Mode Dial to a shooting mode, Battery Life

Page 19

Checking the Battery Level

Check the battery level after replacing the batteries and before using the camera.

Turn the Mode Dial to a shooting mode.

• Hold down the dial’s lock release button while turning the dial.

sThe camera will then turn on and the LCD panel will display one of the following battery level mark:

			: Battery level OK.
			: The battery level is low. Keep


			spare batteries handy.
			: The batteries will soon be
			completely exhausted.
			: Replace the batteries.
Battery Life				(With 24-ex. rolls)

Temperature	0% Flash Use		50% Flash Use	100% Flash Use
At 20˚C	125 (115) rolls		38 (33) rolls	19 (17) rolls
At –20˚C		70 (65) rolls	20 (19) rolls	10 (9) rolls

•The battery life shown above is based on Canon’s testing conditions with new batteries.

•Figures in parentheses apply when the Eye Control switch is <1>.

• If nothing is displayed on the LCD panel, the batteries may have been installed incorrectly. Take out the batteries and install correctly.

•If you often press the shutter button halfway for a prolonged period or just autofocus without taking a picture, the battery life will be affected.

•When not using the camera, set the Mode Dial to <2>.

19

Image 19

Contents Instructions Page Thank you for purchasing a Canon product SymbolsContents User-Controlled Shooting Camera Care and Storage Handling CautionsLens Electrical Contacts How Low Battery Levels Affect Camera OperationLCD Displays BatteriesBatteries as shown. p.18 Install the batteries Attach a lensQuick Start Guide Load the film4Turn the Mode Dial to On the lens, set the focus mode switch to AF. p.208Unload the film Mirror p.75 Contacts p.7 NomenclatureDate Model only With an EX-series Speedlite AEB Nomenclature LCD PanelViewfinder Information Creative Zone Nomenclature Mode DialCreative Basic ZoneEye Control Switch m Model only AF Mode DialFilm Advance Mode Lever Reference page numbers are in parentheses Conventions Used in this InstructionsAttaching the Strap Before You StartClosecover. the battery compartment Installing the BatteriesOpen the battery compartment Install the batteriesTurn the Mode Dial to a shooting mode Checking the Battery LevelBattery Life Mounting a Lens Mounting and Detaching a LensDetaching the Lens When it is pressed fully When it is pressed halfwayHow the Shutter Button Works Loading Film 5Loading and Unloading FilmMove the 7 arrow to the D icon Checking the Film SpeedPress the 6 button To rewind the film in midroll, follow the procedure belowUnloading Film 6Midroll RewindReattach the eyecup Dioptric Adjustment2Turn the dioptric adjustment knob Remove the eyecupHolding the Camera Fully Automatic Shooting Turn the Mode Dial to Y, U, I, O, P, or aPress the shutter button halfway to focus YFull Auto Mode2Aim any of the AF points on the subject Focus the subjectTake the picture AF-Assist beam with the Built-in FlashCompose the shot and press the shutter button fully This is for wide scenic views, night scenes, etc Programmed Image Control ModesPortrait LandscapeNight Portrait SportsMove the 7 arrow to the F icon on the LCD panel To cancel red-eye reduction, set W on the LCD panel2Turn the l dial to set E on the LCD panel 2Take the picture QUsing the Self-timerSet the film advance mode lever to p SThe K icon will be displayed on the LCD panel2Attach the eyepiece cover Using the Eyepiece CoverRemove the eyecup from the eyepiece Push up both sides at the bottom EyecupPress the q button Imprinting the Date or Time Date Model onlyReplacing the Date Battery AF Modes and Metering Modes Selecting the AF Mode AI Servo AF for Moving Subjects One-Shot AF for Still SubjectsSelecting the AF Mode AI Focus AF for Automatic AF Mode Switching∗ Predictive AF 3Selecting an AF Point Basic Procedure for AF Point SelectionDisplay all AF points in red Automatic SelectionManual Selection 3Selecting an AF Point2Select a blinking CAL No Calibration ProcedureSet the Eye Control switch to e EEye Control Calibration m Model onlyEEye Control Calibration m Model only 11Set the Eye Control switch to g Intelligent Eye Control Select a non-blinking CAL No Deleting Eye Control Calibration SettingsPress the w button and 3 button simultaneously Turn the Mode Dial to select the desired shooting mode GUsing Eye Control m Model onlySet the Eye Control switch to e 2Select the CAL No Set the Eye Control switch to g 4Select a shooting modeTurning Off Eye Control Eye Control Servo AF2Select the desired AF point Focus the subject Focusing Off-Center SubjectsSetMF.the lens focus mode switch to 2Focus the subject When Autofocus Fails Manual Focusing8Manual Focusing Difficult Subjects for AutofocusingXPartial metering CCenter-weighted averaging meteringZMetering Modes ZEvaluative meteringUser-Controlled Shooting Program AE Turn the Mode Dial to SCheck the display Difference Between S and Y 4Take the pictureAbout Program Shift 4Check the viewfinder display and take the picture Turn the Mode Dial to R 2Select the desired shutter speedShutter-Priority AE Press the shutter button halfway to focus the subjectShutter Speed Display Aperture-Priority AE Turn the Mode Dial to E 2Select the desired aperture valueSThe shutter speed is set automatically Aperture Value Display Depth-of-field Preview4Press the shutter button halfway to focus the subject Turn the Mode Dial to W 2Select the desired shutter speedManual Exposure Select the desired aperture value6Take the picture Determine the exposureDepth-of-field AE with a Manually-Selected AF Point Turn the Mode Dial to Q. sThe AF mode will be set2Turn the Eye Control switch to Select the AF point Depth-of-field AEFocus farthest subject 4Focus the nearest subject6Compose the picture and press the shutter button halfway Picture Turn the Mode Dial to Q 2Set the Eye Control switch to gMake sure the correct CAL No. has been set. p.48 Focus the nearest subject you want in focusPress the shutter button halfway Depth-of-field AE Set the exposure compensation amount 2Check the exposure settingExposure Compensation Press the shutter button halfway and check the displayLook at the LCD panel and press the 0 button SThe picture will be taken in the current film advance modeLAuto Exposure Bracketing AEB Moveicon. the 7 arrow to the LS R E Q modes Canceling AEB2Press the j button sThe j icon will light JAE LockBlinks on the LCD panel Turn the Mode Dial to W 2Set the shutter speed to yBulb Exposures 4Start the bulb exposure. sDuring the bulb exposure, yMoveicon. the 7 arrow to 4Multiple Exposures2Set the desired number of multiple exposures Turn the l dial to set the film speed HSelecting the Film Advance ModeSetting the ISO Film Speed 2Set the desired film speedBLCD Panel Illumination 2Set the setting to WTurn the l dial To enable the beeper to sound, set to E 9Silencing the Beeper2Pressagain. the shutter button fully Mirror LockupPress the shutter button fully. sThe mirror will lock up SAfter 30 seconds, it will go back down automaticallyUsing the Remote Switch KWireless Remote ControlTurn the film advance mode lever to p Flash Photography This mode gives the same flash result as the S mode Using the Built-in FlashA Basic Zone Mode A Creative Zone ModeISO Flash Distance Range With EF28-105mm f/3.5-4.5Move the 7 arrow to the a icon on the LCD panel Using the Built-in Flash AFlash Exposure Compensation2Set the flash exposure compensation amount About E-TTL II Autoflash Using an EOS-dedicated SpeedliteUsing an EX-series Speedlite Using an EZ/E/EG/ML/TL-series SpeedliteUsing an EOS-dedicated Speedlite Custom Functions C.Fn 2Select the Custom Function No GSetting a Custom FunctionTurn the Mode Dial to G. sThe V icon and Custom Set the Custom Function settingIncrease the film rewind speed Custom Function SettingsEnabled Disabled Makes focusing and AE lock separate operationsDisabled Normal operation Enabled Custom Function Settings1st-curtain sync 2nd-curtain sync Off Auto 125 sec. fixedButton + l u AF stop AF start Disabled EnabledAE lock while metering Aperture value Basic Photography TermsExposure Shutter speedBasic Photography Terms Depth of fieldFeature Availability Table AE Lock Effects AF Mode and Film Advance Mode CombinationProgram Line Description Program LineMisoperation has occurred Picture looks blurred Lens focus mode switch is set to MFThere was camera shake when the picture was taken R icon blinks on the LCD panel Battery level is very lowMajor Specifications Exposure control Major SpecificationsFilm transport Index Shutter Button CT1-1265-000 Canon INC