Canon ELAN7NE-30V Date, ELAN7N-33V, ELAN7NE-33V manual Major Specifications

Page 95

Major Specifications

• Type
Type	35 mm AF/AE SLR camera with built-in flash
Recording media	35 mm film
Image size	24 x 36 mm
Compatible lenses	Canon EF lenses (except EF-S lenses)
Lens mount	Canon EF mount (electronic control)
• Viewfinder
Type	Eye-level pentaprism
Coverage	90% vertical and 92% horizontal coverage
Magnification	0.7x (–1 diopter with 50mm lens at infinity)
Eyepoint	19.5 mm
Dioptric adjustment range ...	–2.5 - +0.5 diopter
Focusing screen	Fixed, all-matte screen
Mirror	Quick-return half mirror (Transmission:reflection ratio of
	40:60, no mirror cut-off with EF 600mm f/4 or shorter
	lens)
Viewfinder information	AF (AF points, focus confirmation light, Eye Control∗);
	Exposure (shutter speed, aperture value, exposure
	level, AE lock); Flash (flash ready, red-eye reduction, hi-
	speed sync, FE lock, Flash Exposure Compensation)
Depth-of-field preview	Depth-of-field preview button
• Autofocus
Type	TTL-CT-SIR with a CMOS sensor
	(TTL secondary image-registration, phase detection)
AF points	7
AF working range	EV 1 - 18 (at 20˚C, ISO 100)
Focusing modes	One-Shot AF, AI Servo AF, AI Focus AF, Manual
	focusing (MF)
AF point selection	Automatic selection, manual selection, manual
	selection with Eye Control (Eye Control AF)∗
Selected AF point display ...	Superimposed in viewfinder and displayed on LCD
	panel.
AF-assist beam	Built-in flash fires intermittent burst automatically.
	Effective range: Approx. 4.5 meters at center, Approx. 4
	meters at periphery.
• Eye Control∗
Type	Eye position detected by IREDs.
Calibration	Up to five calibration settings can be stored (Intelligent
	feature provided).

95

Image 95

Contents Instructions Page Thank you for purchasing a Canon product SymbolsContents User-Controlled Shooting Camera Care and Storage Handling CautionsLens Electrical Contacts How Low Battery Levels Affect Camera OperationLCD Displays BatteriesBatteries as shown. p.18 Install the batteries Attach a lensQuick Start Guide Load the film8Unload the film On the lens, set the focus mode switch to AF. p.204Turn the Mode Dial to Mirror p.75 Contacts p.7 NomenclatureDate Model only With an EX-series Speedlite AEB Nomenclature LCD PanelViewfinder Information Creative Zone Nomenclature Mode DialCreative Basic ZoneFilm Advance Mode Lever AF Mode DialEye Control Switch m Model only Reference page numbers are in parentheses Conventions Used in this InstructionsAttaching the Strap Before You StartClosecover. the battery compartment Installing the BatteriesOpen the battery compartment Install the batteriesBattery Life Checking the Battery LevelTurn the Mode Dial to a shooting mode Detaching the Lens Mounting and Detaching a LensMounting a Lens How the Shutter Button Works When it is pressed halfwayWhen it is pressed fully Loading Film 5Loading and Unloading FilmMove the 7 arrow to the D icon Checking the Film SpeedPress the 6 button To rewind the film in midroll, follow the procedure belowUnloading Film 6Midroll RewindReattach the eyecup Dioptric Adjustment2Turn the dioptric adjustment knob Remove the eyecupHolding the Camera Fully Automatic Shooting Turn the Mode Dial to Y, U, I, O, P, or aPress the shutter button halfway to focus YFull Auto Mode2Aim any of the AF points on the subject Focus the subjectCompose the shot and press the shutter button fully AF-Assist beam with the Built-in FlashTake the picture This is for wide scenic views, night scenes, etc Programmed Image Control ModesPortrait LandscapeNight Portrait Sports2Turn the l dial to set E on the LCD panel To cancel red-eye reduction, set W on the LCD panelMove the 7 arrow to the F icon on the LCD panel 2Take the picture QUsing the Self-timerSet the film advance mode lever to p SThe K icon will be displayed on the LCD panel2Attach the eyepiece cover Using the Eyepiece CoverRemove the eyecup from the eyepiece Push up both sides at the bottom EyecupPress the q button Imprinting the Date or Time Date Model onlyReplacing the Date Battery AF Modes and Metering Modes Selecting the AF Mode AI Servo AF for Moving Subjects One-Shot AF for Still Subjects∗ Predictive AF AI Focus AF for Automatic AF Mode SwitchingSelecting the AF Mode 3Selecting an AF Point Basic Procedure for AF Point SelectionDisplay all AF points in red Automatic SelectionManual Selection 3Selecting an AF Point2Select a blinking CAL No Calibration ProcedureSet the Eye Control switch to e EEye Control Calibration m Model onlyEEye Control Calibration m Model only 11Set the Eye Control switch to g Intelligent Eye Control Press the w button and 3 button simultaneously Deleting Eye Control Calibration SettingsSelect a non-blinking CAL No Turn the Mode Dial to select the desired shooting mode GUsing Eye Control m Model onlySet the Eye Control switch to e 2Select the CAL No Set the Eye Control switch to g 4Select a shooting modeTurning Off Eye Control Eye Control Servo AF2Select the desired AF point Focus the subject Focusing Off-Center SubjectsSetMF.the lens focus mode switch to 2Focus the subject When Autofocus Fails Manual Focusing8Manual Focusing Difficult Subjects for AutofocusingXPartial metering CCenter-weighted averaging meteringZMetering Modes ZEvaluative meteringUser-Controlled Shooting Check the display Turn the Mode Dial to SProgram AE About Program Shift 4Take the pictureDifference Between S and Y 4Check the viewfinder display and take the picture Turn the Mode Dial to R 2Select the desired shutter speedShutter-Priority AE Press the shutter button halfway to focus the subjectShutter Speed Display SThe shutter speed is set automatically Turn the Mode Dial to E 2Select the desired aperture valueAperture-Priority AE Aperture Value Display Depth-of-field Preview4Press the shutter button halfway to focus the subject Turn the Mode Dial to W 2Select the desired shutter speedManual Exposure Select the desired aperture value6Take the picture Determine the exposureDepth-of-field AE with a Manually-Selected AF Point Turn the Mode Dial to Q. sThe AF mode will be set2Turn the Eye Control switch to Select the AF point Depth-of-field AE6Compose the picture and press the shutter button halfway 4Focus the nearest subjectFocus farthest subject Picture Turn the Mode Dial to Q 2Set the Eye Control switch to gMake sure the correct CAL No. has been set. p.48 Focus the nearest subject you want in focusPress the shutter button halfway Depth-of-field AE Set the exposure compensation amount 2Check the exposure settingExposure Compensation Press the shutter button halfway and check the displayLook at the LCD panel and press the 0 button SThe picture will be taken in the current film advance modeLAuto Exposure Bracketing AEB Moveicon. the 7 arrow to the LS R E Q modes Canceling AEB2Press the j button sThe j icon will light JAE LockBlinks on the LCD panel Turn the Mode Dial to W 2Set the shutter speed to yBulb Exposures 4Start the bulb exposure. sDuring the bulb exposure, y2Set the desired number of multiple exposures 4Multiple ExposuresMoveicon. the 7 arrow to Turn the l dial to set the film speed HSelecting the Film Advance ModeSetting the ISO Film Speed 2Set the desired film speedBLCD Panel Illumination 2Set the setting to WTurn the l dial To enable the beeper to sound, set to E 9Silencing the Beeper2Pressagain. the shutter button fully Mirror LockupPress the shutter button fully. sThe mirror will lock up SAfter 30 seconds, it will go back down automaticallyTurn the film advance mode lever to p KWireless Remote ControlUsing the Remote Switch Flash Photography This mode gives the same flash result as the S mode Using the Built-in FlashA Basic Zone Mode A Creative Zone ModeISO Flash Distance Range With EF28-105mm f/3.5-4.52Set the flash exposure compensation amount Using the Built-in Flash AFlash Exposure CompensationMove the 7 arrow to the a icon on the LCD panel About E-TTL II Autoflash Using an EOS-dedicated SpeedliteUsing an EX-series Speedlite Using an EZ/E/EG/ML/TL-series SpeedliteUsing an EOS-dedicated Speedlite Custom Functions C.Fn 2Select the Custom Function No GSetting a Custom FunctionTurn the Mode Dial to G. sThe V icon and Custom Set the Custom Function settingIncrease the film rewind speed Custom Function SettingsEnabled Disabled Makes focusing and AE lock separate operations1st-curtain sync 2nd-curtain sync Custom Function SettingsDisabled Normal operation Enabled Button + l u Auto 125 sec. fixedOff AE lock while metering Disabled EnabledAF stop AF start Aperture value Basic Photography TermsExposure Shutter speedBasic Photography Terms Depth of fieldFeature Availability Table AE Lock Effects AF Mode and Film Advance Mode CombinationProgram Line Description Program LineMisoperation has occurred Picture looks blurred Lens focus mode switch is set to MFThere was camera shake when the picture was taken R icon blinks on the LCD panel Battery level is very lowMajor Specifications Exposure control Major SpecificationsFilm transport Index Shutter Button CT1-1265-000 Canon INC