Canon ELAN7NE-33V, ELAN7NE-30V manual HSelecting the Film Advance Mode, Setting the ISO Film Speed

HSelecting the Film Advance Mode★

The film advance mode can be set to Single <J> or Continuous <H>.

• To set the film advance mode, turn the film advance mode lever.

• The film advance mode takes effect in the Creative Zone modes.

• The continuous shooting speed will be as follows:

4: Approx. 4 fps

5: Approx. 3.5 fps

DSetting the ISO Film Speed★

If the film is not DX-coded or if you want to set a different film speed, load the film in the camera and set the film speed manually as follows. The settable film speed range is ISO 6 to 6400.

1 Move the <7> arrow to the <D> icon.

• Look at the LCD panel and press the <0> button to move the arrow. (1)

sThe current film speed is displayed.

2Set the desired film speed.

• Turn the <l> dial to set the film speed.

• Press the shutter button halfway to return to normal camera operation.

The manually-set film speed will be canceled if the film is taken out and DX- coded film is loaded.

With C.Fn-03-1, you can retain the manually-set film speed even after taking out the film and loading another DX-coded roll of film. (p.85)

73