Canon 1100D manual Press, Exit the menu

Av: Changing the Depth of Field

To obtain a correct flash exposure, the flash output wiii be set automatically to match the set aperture (autoflash exposure). The shutter speed wiii be set automatically between 1/200 sec. - 30 sec. to suit the scene's brightness.

in low light, the main subject is exposed with the automatic flash, and the background is exposed with a slow shutter speed set automatically. Both the subject and background look properly exposed (automatic slow-speed flash sync), if you are handholding the camera, keep it steady to prevent camera shake. Using a tripod is recommended.

If you do not want a slow shutter speed to be used, set [2: Flash sync. speed in Av mode] to [1:1/200-1/60 sec. auto] or [2:11200 sec. (fixed)] in [_ Custom Functions (C.Fn)] (p.218).

The aperture opening (diaphragm) changes only at the moment when the picture is taken. Otherwise, the aperture remains fully open. Therefore, when you look at the scene through the viewfinder or LCD monitor, the depth of field wiii look narrow. With the procedure below, you can check the depth of field before taking the picture.

Enable depth-of-field preview to be used.

Under [_ Custom Functions (C.Fn)], set [8: Assign SET

button] to [5: Depth-of-field preview] (p.222).

For details about Custom Function settings, see page 216.

Exit the menu.

Press the < MENU > button two times to exit the menu.

press

The aperture will be stopped down so you can see the depth of field.

While looking at the Live View image (p.122) and holding down the <_)> button, you can change the aperture and see how the depth of field changes.

96