12.Slide Camera Tray forward until Release Button engages.
13.Rotate camcorder power switch to Memory.
∃Although camcorder Power switch is set to Memory, when camcorder initially interfaces with Stingray, it will be in Camera mode.
14.Replace rear plate.
A.Perform an
B.Align guide pins into base of Camera Tray.
C.Rotate both latches evenly until they lock. Ensure rear plate draws in straight and that
Operation
The Stingray housing is designed to access basic camcorder features using electromagnetic switch control sets (left and right side of Stingray) and mechanical interfaces (front plate).
Right Control Set Controls
ZOOM Switch
T - Slide forward and hold for telephoto (subjects appear closer).
W - Slide rearward and hold for wide angle (increases viewing angle).
MODE/OFF - REC/PHOTO
MODE/OFF
Slide switch backward and release to toggle between Camera and Memory modes.
Slide switch backward and hold for three seconds to turn camcorder off.
REC/PHOTO
In Camera mode, slide switch forward and release to toggle between record and
In Memory mode, slide switch forward and release to capture an image to Memory Stick.
Left Control Set
FOCUS Switch
N - Slide switch forward and hold to put camcorder into manual focus and move focus point closer to camcorder.
F - Slide switch backward and hold to put camcorder into manual focus and move focus point further from camcorder.
MOM. AF / AF LOCK Switch
MOM. AF - Slide switch forward and hold to put camcorder into “momentary auto focus”. Camcorder remains in auto focus as long as the switch is held forward. Once released, the camcorder switches to manual focus. This is useful in stopping the camcorder from “seeking” when filming in a low contrast environment. To return the camcorder to auto focus, slide MOM. AF / AF LOCK switch backward to the AF LOCK position and release.
AF LOCK - Slide switch reward to return camcorder to auto focus from manual focus.
Front Plate
1)Microphone - Records sound to a depth of 80ft.
2)Flip filter - Rotate lever to engage or disengage color correction filter.
3)ON Button - Camcorder will be on and in Camera mode when properly installed into the housing. Press the ON button once to turn the camcorder on after camcorder has been turned off by the MODE/OFF switch, or if camcorder has automatically shut down.