Insignia NS-FSDVDR manual Maintaining, Troubleshooting

											Insignia NS-FSDVDR DVD recorder
4		Press		or		to select Index Picture, then					Cleaning the disc lens
		press ENTER. A confirmation screen opens.									If you tried the solutions in the troubleshooting
											section, and your recorder still does not work
			Playlist - Index Picture								correctly, the laser optical pickup lens may be
											dirty. Contact authorized service personnel for
									Yes		inspection and cleaning of the pickup lens.
								1
									No		Testing the remote control
											If the remote control does not work correctly, you
											can test the remote control’s signal with an AM
											radio or a digital camera (including a cellular
											phone camera).
			JAN/ 1/06 1:00AM CH12 XP								To test the remote control signal with an AM
										0:00:59	radio:
											1 Tune to an AM radio to a frequency with no
5		Press		or		to select Yes, then press
											broadcasting.
		ENTER. The thumbnail label is added to the
		title. This may take a while.									2 Point the remote control at the radio, then
6		Press RETURN					, then press RETURN				press any button. If radio sound flutters, the
		or STOP			to close the menu.						remote control is working.
											To test the remote control signal with a
Maintaining
											digital camera:
Servicing											• Point the remote control at the digital camera,
											then press and hold any button. If you see a
	•	Refer to relevant topics in “Troubleshooting”									light in the camera view finder, the remote
											control is working.
		on page 44 before returning your recorder.
	•	If your recorder quits working, do not try to									Troubleshooting
		repair the problem by yourself. There are no
		user serviceable parts inside. Turn off your									Power
		recorder, unplug the power plug, and contact
		authorized service personnel.

Cleaning the cabinet

Use a soft cloth slightly moistened with a mild detergent solution. Do not use a solution containing alcohol, spirits, ammonia, or abrasive cleaners. They may damage the cabinet.

Problem	Solution
The power does not turn on.	•	Make sure that the AC power
		cord is connected securely.
	•	If power has failed, check the
		breaker.

Handling discs

•To keep a disc clean, do not touch the play side (non-label side) of the disc.

•Do not attach paper or tape to the disc.

•Keep the disc away from direct sunlight or heat sources.

•Store the disc in a disc case after you remove it from your recorder.

Cleaning discs

•Before playback, wipe the disc outwards from the center with clean cloth.

Picture

Problem	Solution
There is no picture.	• Make sure that all cables are
	connected securely.
	• Make sure that no cables are
	damaged.
	• If the Setup menu appears on
	the TV screen, press
	RETURN	to close the
	menu.
	• Make sure that the TV is
	connected correctly. For more
	information, see “Setting up
	your recorder” on page 9.
	• If the TV is connected with
	the S-VIDEO or A/V jacks,
	make sure that your recorder
	is set to interlaced mode.
	During DVD playback, press
	and hold SETUP for more
	than three seconds.
	• Change the video input on the
	TV so a picture appears on
	the screen. For a list of video
	inputs for TV brands, see “TV
	video input sources” on
	page 12.

44 www.insignia-products.com