Insignia NS-FSDVDR manual Cancelling or correcting a timer program recording

Insignia NS-FSDVDR DVD recorder

10Make sure that the information you entered is correct, then press ENTER. The timer recording is added to the schedule.

11To add another timer recording to the schedule, repeat Step 3 through Step 10.

12Press TIMER PROG. or SETUP to close the menu.

13Press POWER. The icon appears on the front panel display.

Tips

•If power fails or your recorder is unplugged for more than 30 seconds, the clock setting and all timer programming is lost.

•If a DVD is not in the disc tray, flashes and your recorder cannot record. In some cases, appears momentarily near the recording start time. Insert a recordable DVD.

•When all timer recordings are completed, flashes. To play or eject the recorded DVD, press POWER first, then press PLAY or

OPEN/CLOSE .

•During a timer recording or when your recorder is in standby waiting for a timer recording to start, you cannot use many of the remote control or front panel buttons. To make these buttons available, cancel the timer recording or timer standby ( disappears).

•To cancel the timer standby mode, press

POWER.

•When the start and the end times are the same, the length of the recording is set for 24 hours. When your recorder reaches the end of the recording, it turns itself off.

•When the programmed start and end times are earlier than the current time, the setting is not accepted and the entry is deleted from the list of recordings.

•If the start time is earlier and the end time is later than the current time, the recording will start right after you turn off the power.

Overlapping timer recordings

If you schedule two timer recordings with overlapping times, the first recording you schedule takes priority.

For example, if you schedule program A to record between 8:00 p.m. and 10:00 p.m., then schedule program B for the same time, your recorder records program A instead of program B.

If you schedule program A to record between 8:00 p.m. and 10:00 p.m., then schedule program B to record between 9:00 p.m. and 11:00 p.m., your recorder records program A. At 10:00 p.m., your recorder starts recording the second half of program B.

If you schedule program A to record between 8:00 p.m. and 10:00 p.m., then schedule program B to record between 10:00 p.m. and 11:00 p.m., your recorder records program A, then records program B. The first few seconds of program B may not record because it takes a few seconds (no more than 30) for your recorder to switch from one program to another.

Note

If more than one minute of a recording is not recorded, the error message E40 appears next to the recording on the Timer Programming screen.

Cancelling or correcting a timer program recording

To cancel or correct a timer recording:

1Press POWER. The icon disappears from the front panel display.

2Press TIMER PROG. The Timer Programming screen opens.

Timer Programming

	Date	Start	End	CH	Speed
1.	JAN/01	12:57AM	1:57AM	CH 8	1H
2.	---

3To cancel a timer recording, press or to select the recording you want to cancel, then press CLEAR.

4To correct a timer recording, press or to select the recording you want to correct, then

press ENTER. Press or to select the item you want to correct, then enter the correct information.

5Press TIMER PROG. to close the menu.

6Press POWER to return to standby mode.

Checking a timer recording in progress

To check a timer recording in progress:

•Press TIMER PROG. The Timer Programming screen opens, and the recording in progress is highlighted in red.

Stopping a timer recording in progress

To stop a timer recording in progress:

•Press STOP on the front panel. Pressing STOP on the remote control will not stop the recording.

Troubleshooting timer recordings

If a timer recording does not record correctly, an error message appears on the Timer Programming screen next to the recording that did not work.

Timer Programming

Date Start End CH Speed

* JAN/01 12:57AM 1:57AM CH 8 E22

2.---

3. ---

4.---

5.---

6.---

7.---

8. ---

Error messages

E1-E22	Recording error other than those listed
E37-E39	in this table
E23-E24	Unrecordable disc
E25-E28	Copy-protected program
E29	DVD is protected.
E30	DVD is full

32 www.insignia-products.com