Photography with and without flash

Note: The descriptions of each of the modes indicate whether they can only be selected using the “2nd setting level” (applies to No. 3–5 and 8–14).

Important: Once selected, a mode remains active until you select another one. If, on the other hand, the camera is switched off or switches itself off, the default setting is active when it is switched on again. However, if a mode has been stored it becomes the default mode and remains active even when the camera is turned on and off (see “Storing flash modes/the set exposure compen- sation” on p. 108).

Photography with and without flash

The LEICA CM has a built-in flash (5), which either fires automat- ically or can be manually switched on or off, depending on the selected mode.

It is also possible to use a pre-flash light (3), in order to reduce the “red eye effect”.

The ISO flash shoe (11) also allows the use of more powerful ex- ternal flash units, preferably models that meet the SCA-3002 standard (with SCA-3502 M4 adapter), which in many cases can completely prevent “red eye effect” due to the larger distance of their flash reflectors from the lens axis. We specifically recom- mend the LEICA SF 24D (order No. 14 444/14 448)

Instructions for using external flash units

•As soon as a system-compatible external flash unit is at- tached, the set flash modes with pre-flash function (No. 2, 4, 7, 9, and 12) are reset to the otherwise identical modes with- out pre-flash (No. 1, 3, 6, 8, and 11) and displayed accordingly in the data panel (19).

However, when the flash unit is removed the camera is reset to the stored mode, i.e. either to a (the default factory setting, see p. 89) or the mode you have permanently stored (see “Storing flash modes/the set exposure compensation”, p. 108).

•On the LEICA SF 24D, the mode TTL/GNC should be set to al- low automatic control by the camera. When set to A, subjects with above or below average brightness may not be optimally exposed. When set to M, the flash exposure must be adjusted to the aperture and distance values set by the camera by set- ting a corresponding reduced power output level.

•For SCA-3002 standard flash units:

1.To retain the automatic flash exposure control, an SCA-3502 M4 adapter is required.

2.It must be possible to set the flash unit to a mode that allows the camera’s guide number calculation to control the flash power (Guide Number Control, see the relevant flash instructions).

•For all other SCA system flash units and earlier adapters than the SCA-3502 M4:

1.The flash unit must be set to A or M.

2.For M, the reduced power output must be determined by guide number calculation and set manually on the flash unit.

•For non-SCA flash units:

1.The only available flash modes are manual flash activation and deactivation (No. 6 and 15).

2.Only aperture priority can be used on the camera (when setting to programmed automatic exposure mode, appears in the viewfinder and the shutter release button is blocked).

18141 specifications

Leica, a name synonymous with precision optics and high-quality imaging, has continued to innovate with its line of products. Two noteworthy models in this realm are the Leica 18069 and the Leica 18141. Each of these products showcases a blend of cutting-edge technology, meticulous craftsmanship, and user-friendly design, making them stand out in the competitive landscape of photography and imaging equipment.

The Leica 18069, commonly known as the Leica V-Lux 5, is a versatile bridge camera designed for both amateur and professional photographers. One of its main features is the powerful 20-megapixel sensor that captures high-resolution images with remarkable detail. The camera is equipped with a 25-400mm equivalent zoom lens, allowing users to shoot everything from wide-angle landscapes to close-up portraits seamlessly. This extensive zoom range is complemented by a fast autofocus system that ensures sharp focus, even in challenging lighting conditions.

A standout technology in the V-Lux 5 is its advanced image stabilization system, which reduces the effects of camera shake and enhances the clarity of handheld shots. Additionally, the camera can shoot in continuous burst mode at up to 12 frames per second, catering to dynamic photography needs. The high-resolution electronic viewfinder and intuitive touchscreen display provide a responsive and immersive shooting experience.

On the other hand, the Leica 18141, recognized as the Leica M10, represents the pinnacle of Leica's commitment to rangefinder photography. The M10 is known for its compact and minimalist design, which pays homage to its classic predecessors while incorporating modern technological advancements. It features a full-frame 24-megapixel CMOS sensor that delivers outstanding image quality and dynamic range, ensuring stunning performance in various shooting conditions.

The M10's unique rangefinder focusing system allows for precise manual focusing, making it a favorite among photographers who appreciate the art of traditional photography. Its ISO sensitivity ranges from 100 to 50,000, providing great flexibility for low-light shooting. The camera also supports a wide array of Leica M-mount lenses, enhancing its versatility for creative expression.

In summary, both the Leica 18069, with its comprehensive features and ease of use, and the Leica 18141, emphasizing a traditional yet advanced approach to imaging, exemplify Leica’s commitment to quality and innovation. Each camera caters to different styles and preferences, highlighting the brand's ability to combine heritage with progress in the pursuit of exceptional photography. Whether capturing fleeting moments or composing timeless portraits, these cameras deliver the excellence that Leica is renowned for.