Sony DCR-TRV130ERMT-814 service manual Inspect the lens block focus reset sensor Pin qs of CN1551

Self-diagnosis Code
by:	Block		Detailed		Symptom/State	Correction
Repaired
	Function		Code
						Inspect the lens block focus reset sensor (Pin qs of CN1551 of
E	6	1	0	0	Difficult to adjust focus	VC-256 board) when focusing is performed when the control dial
					(Cannot initialize focus.)	is rotated in the focus manual mode and the focus motor drive circuit
						(IC1551 of VC-256 board) when the focusing is not performed.
						Inspect the lens block zoom reset sensor (Pin qf of CN1551 of
E	6	1	1	0	Zoom operations fault	VC-256 board) when zooming is performed when the zoom lens is
					(Cannot initialize zoom lens.)	operated and the zoom motor drive circuit (IC1551 of VC-256
						board) when zooming is not performed.
					Handshake correction function does not	Inspect pitch angular velocity sensor (SE751 of MI-041 board)
E	6	2	0	0	work well. (With pitch angular velocity
					sensor output stopped.)	peripheral circuits.
					Handshake correction function does not	Inspect yaw angular velocity sensor (SE752 of MI-041 board)
E	6	2	0	1	work well. (With yaw angular velocity
					sensor output stopped.)	peripheral circuits.

— 7 —