Natural Gas Conversion, Complete Installation

7.Place Natural gas orifice in plastic parts bag for future use and keep with package containing literature.

8.Replace the burner base using both screws.

9.Replace burner head and cap.

10.Repeat steps 2 through 9 for the remaining burners.

Complete Installation

1.Refer to the “Make Gas Connection” section for properly connecting the range to the gas supply.

2.Refer to the “Electronic Ignition System” section for proper burner ignition, operation, and burner flame adjustments.

IMPORTANT: You may have to adjust the “LO” setting for each cooktop burner.

Checking for proper cooktop burner flame is very important. The small inner cone should have a very distinct blue flame ¼" (0.64 cm) to ½" (1.3 cm) long. The outer cone is not as distinct as the inner cone. LP gas flames have a slightly yellow tip.

3.Refer to “Complete Installation” in the “Installation Instructions” section of this manual to complete this procedure.

Natural Gas Conversion

WARNING

Tip Over Hazard

A child or adult can tip the range and be killed.

Connect anti-tip bracket to rear range foot.

Reconnect the anti-tip bracket, if the range is moved.

Failure to follow these instructions can result in death or serious burns to children and adults.

1.Turn manual shutoff valve to the closed position.

A. To range

B. Shutoff valve (closed position)

C. Gas supply line

2.Unplug range or disconnect power.

To Convert Gas Pressure Regulator

1.Remove the access cap by using a wrench, turning the access cap counterclockwise.

2.Remove spring retainer from the cap by pushing against the flat side of the spring retainer. Look at the spring retainer to locate the “LP” or “NAT” position. Turn over the spring retainer so the “NAT” is showing on the bottom. Snap the spring retainer back into the cap. Reinstall the cap onto the regulator.

E	D	C
A. Access cap		D. NAT position
B. Gasket		E. LP position

C. Gas pressure regulator

3.Test the gas pressure regulator and gas supply line.

The regulator must be checked at a minimum 1" (2.5 cm) water column above the set pressure. The inlet pressure to the regulator should be as follows for operation and checking the regulator setting:

Natural Gas:

Minimum pressure 6" (15.2 cm) WCP Maximum pressure 14" (35.6 cm) WCP

Gas Supply Pressure Testing

Gas supply pressure for testing regulator must be at least 1" water column pressure above the manifold pressure shown on the model/serial rating plate.

Line pressure testing above ½ psi gauge (14" WCP)

The range and its individual shutoff valve must be disconnected from the gas supply piping system during any pressure testing of that system at test pressures in excess of ½ psi (3.5 kPa).

Line pressure testing at ½ psi gauge (14" WCP) or lower

The range must be isolated from the gas supply piping system by closing its individual manual shutoff valve during any pressure testing of the gas supply piping system at test pressures equal to or less than ½ psi (3.5 kPa).

W10349768A specifications

The Jenn-Air W10349768A is a premium range hood designed to enhance the functionality and aesthetic appeal of modern kitchens. With a blend of advanced technology and elegant design, this model meets the needs of culinary enthusiasts and homeowners alike.

One of the key features of the W10349768A is its powerful ventilation system. Equipped with a robust motor, it offers multiple fan speeds to efficiently eliminate smoke, odors, and airborne grease created during cooking. Its high airflow capacity ensures that even the most intense cooking sessions leave your kitchen fresh and clean. This range hood is particularly effective in larger kitchen spaces, making it a versatile choice for various layouts.

The design of the W10349768A prioritizes aesthetics as much as functionality. The sleek stainless steel finish not only provides a modern look but is also easy to clean and maintain, ensuring that it remains a focal point in your kitchen for years to come. The unit's minimalist design integrates seamlessly with a wide range of kitchen styles while providing the durability expected from a Jenn-Air product.

In terms of technology, the W10349768A features advanced noise reduction capabilities. It operates at a lower decibel level compared to traditional range hoods, making it ideal for open-concept living spaces where noise can disrupt conversations or the enjoyment of family gatherings. This attention to noise levels reflects Jenn-Air’s commitment to creating a pleasant cooking environment.

The range hood also comes with convenient features like adjustable lighting. Equipped with high-quality LED lights, it provides ample illumination for the cooking surface below, enhancing visibility while also being energy-efficient. This allows home cooks to monitor their meals effortlessly and adds an inviting ambiance to the kitchen.

Another notable characteristic of the W10349768A is its easy-to-use controls. The intuitive interface allows users to adjust fan speeds and lighting with just a touch, making it accessible for everyone in the household. Additionally, the dishwasher-safe filters ensure that maintenance is straightforward, promoting hygiene and performance.

All of these features make the Jenn-Air W10349768A a top choice for those looking to blend performance with style in their kitchen. Its powerful ventilation, modern aesthetics, and user-friendly technology position it as an essential tool for any serious home chef. Whether you're sautéing, grilling, or baking, this range hood is designed to enhance your culinary experience while elevating the overall design of your kitchen space.