JVC TK-C553 manual Rotate the camera body clockwise

Page 18

INSTALLATION

Ceiling Installation (Continued)

4.

(2) Position alignment mark

(1)

Camera clamping screw

(2) Camera position

(2)alignment mark

Clamp

(3)

Camera clamping screw

Rotate the camera body clockwise

4. Mount the camera body.

1)Ensure that the camera clamping screw on the ceiling mount is loosened.

2)Align the camera position alignment mark on the camera body with the camera position alignment mark on the ceiling mount and press the camera body straight against the

mount.

Note

Exercise caution when mounting so as not to pinch the drop prevention wire and the connected cables.

3)Rotate the camera body clockwise as far as it will go.

At this point, check that the camera body clamp is located on the lock screw on the ceiling mount.

4)Tighten the camera clamping screw.

CAUTION

Be sure to tighten the camera clamping screw fully. Otherwise the camera body may vibrate or drop from the ceiling.

To dismount the camera from the ceiling, perform steps 2. to 4. in reverse order.

Camera clamping screw

(4)

Tighten the camera clamping screw.

18

Image 18

Contents TK-C553 Important Safeguards Page Safety Precautions Contents Features Precautions for Use with the RM-P2580 RM-P2580 P/T SpeedCamera Body Body SurfaceDIP switch Video synchronization selector switch Control signal termination ON/OFF Switch Body Underside Guide holes for mounting camera ⋅ Ceiling MountMounting holes ⋅ Camera clamping screwSystem with Remote Control Unit RM-P2580 SystemConnecting the control signal cable Menu Screen Settings Communication menu screen Function menu screenTermination OFF/ON Connections to Camera Terminal Board Connections to Terminal Board Video signal cables Control signal cablesCeiling Installation Attach the drop prevention wireRotate the camera body clockwise Adjusting the Camera Angle Attach the dome cover Connection for Adjustment of the Camera MonitorSetup Menu Setup Menu FlowFunction Screen Menu Settings Using the Operation Buttons on the Camera Body To save the setting contents, be sure to select MemoryMenu Settings Using the RM-P2580 CameraSetup Menu Screen Video Adjust Screen White AveragePeak ATW BalanceMode Select Screen Communication Screen Function Screen BLC Back Light Compensation Adjustment Fixed Light Metering AreasManual Adjustment of White Balance User Settable Light Metering AreasWhite Balance AWC One-push Auto White Balance Adjustment Menu shown is displayedCamera Text Setting RM-P2580Displayed only for E-version Auto Start Demo PAN, TILT, SCROLL, PatrolPosition Text Setting RM-P2580S I T I O N T E X T - 0 1 2 3 4 5 6 7 8 Auto Patrol Setting RM-P2580Place at this position Specifications External dimensions Unit mmTK-C553 Color Dome Camera