Adjusting the Camera Angle
Dome cover
Remove the dome cover.
Rotate the dome cover counterclockwise and pull it off.
Horizontal rotation (adjustable range: 90°)
1.Loosen the horizontal LOCK screw.
2.Holding the both tilt lock screws, rotate horizontally.
3.Tighten the horizontal LOCK screw.
Camera head
MONITOR
|
|
|
|
| NOT USED |
|
|
|
|
| NOT USED |
|
|
|
| INT | L/L |
|
|
|
| OFF | ON |
|
|
|
| TERMINATION |
|
LOCK | LEFT | AWC | UP RIGHT | SET |
|
|
|
DOWN
Horizontal LOCK screw
Rotation levers
Zoom ring
Focus ring
Tilt lock screws
Vertical rotation (adjustable range: 130°)
1.Loosen the tilt lock screws.
2.Holding the rotation levers, rotate vertically.
3.Tighten the tilt lock screws.
Image inclination
(adjustable range: 30°)
Manipulate the rotation levers to adjust the inclination of the image.
Adjusting the image size
Adjust the size using the zoom ring.
Adjusting the focus
Adjust using the focus ring.
When required, the surveillance image should be adjusted, etc. This adjustment is performed using the setup screen.
19