JVC TK-C553 manual Precautions for Use with the RM-P2580, RM-P2580 P/T Speed

Page 7

●If a high-intensity object (such as a lamp) is shot, the image on the screen may have vertical lines (smear) or blur (blooming) at its periphery. This is a characteristic of the CCD, and is not a defect.

●Resolution decreases as the digital zoom ratio is increased.

●Do not touch the dome cover of the lens directly with your hand, contamination of this cover will lead to a deterioration of the picture quality.

●Observe the following when carrying out camera maintenance.

•Turn the power OFF before proceeding to carry out maintenance.

•Clean the dome cover lens using a lens wiper cloth (or a tissue).

If it is contaminated seriously, clean the contaminated part with a cloth (or a tissue) which has been soaked in a solution of water and a neutral detergent.

Precautions for Use with the RM-P2580

• The focus button will be inoperative.

• The Pan/Tilt speed becomes as shown in the following table.

RM-P2580 P/T SPEED

2

4

6

8

TK-C553 operation

2

4

4

4

 

 

 

 

 

• During auto pan operation, the PAN/TILT and ZOOM buttons remain inoperative.

• The auto pan start/stop positions cannot be set.

• Auto patrol works.

 See page 41.

Safety Precautions

•Installation of this unit requires expertise. Please contact your dealer for details.

•The ceiling to mount the TK-C553 has to be strong enough to support ten times the weight of this product.

If the ceiling is not strong enough, make sure to apply reinforcement to the ceiling before installation.

•Be sure to tighten the screws and nuts se- curely, Insufficient tightening may cause the unit to fall from its mount.

•The unit is to be powered by a DC 12 V or an AC 24 V power supply.

The AC 24 V power supply should conform to the following:

Isolated power supply only (E type) Class 2 only (U type)

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents TK-C553 Important Safeguards Page Safety Precautions Contents Features RM-P2580 P/T Speed Precautions for Use with the RM-P2580 Body Surface Camera Body Control signal termination ON/OFF Switch DIP switch  Video synchronization selector switch Body Underside Camera clamping screw Ceiling MountMounting holes ⋅ Guide holes for mounting camera ⋅System System with Remote Control Unit RM-P2580Connecting the control signal cable  Function menu screen Menu Screen Settings  Communication menu screenTermination OFF/ON Connections to Terminal Board Connections to Camera Terminal Board Control signal cables  Video signal cablesAttach the drop prevention wire Ceiling InstallationRotate the camera body clockwise Adjusting the Camera Angle Attach the dome cover Monitor Connection for Adjustment of the CameraSetup Menu Flow Setup MenuFunction Screen To save the setting contents, be sure to select Memory Menu Settings Using the Operation Buttons on the Camera BodyCamera Menu Settings Using the RM-P2580Setup Menu Screen Video Adjust Screen ATW Balance AveragePeak WhiteMode Select Screen Communication Screen Function Screen Fixed Light Metering Areas BLC Back Light Compensation AdjustmentUser Settable Light Metering Areas Manual Adjustment of White BalanceWhite Balance Menu shown is displayed AWC One-push Auto White Balance AdjustmentRM-P2580 Camera Text SettingDisplayed only for E-version PAN, TILT, SCROLL, Patrol Auto Start DemoRM-P2580 Position Text SettingS I T I O N T E X T - 0 1 2 3 4 5 6 7 8 RM-P2580 Auto Patrol SettingPlace at this position  External dimensions Unit mm SpecificationsTK-C553 Color Dome Camera
Top Page Image Contents