Features

Color Dome Camera with integrated variable-focal-length lens and camera.

Backlight compensation function provided. Enables improvement of video image shot with backlit conditions.

Employment of TTL automatic tracking white balance allows use under various light source conditions.

One-push auto white balance (AWC) function.

Control possible via external control signal conforming to the EIA/TIA RS- 422A or RS-485 standard. The unit can be controlled using the JVC Remote Control Unit RM-P2580.

Setup menus can be set using buttons on the camera body or by external control signal.

Auto panning and tilting, auto scrolling and auto patrol possible.

Up to 6 position settings per camera.

Setting of camera text and position text possible.

Digital zoom enables up to 2⋅ zoom.

Before starting an important recording, be sure to perform a test recording in order to confirm that a normal recording is possible.

We do not accept liability for the loss of a recording in the case of it becoming impossible to record due to a problem in the video camera, VCR or video tape.

We do not accept liability for any damage to the camera in cases when it is dropped because of incomplete installation due to not observing the installation instructions correctly. Please be careful when installing the camera.

Operating Precautions

●To save energy, when it is not being used turn the system’s power off.

●This camera has been designed for indoor use. It cannot be used outdoors.

●T h i s c a m e r a h a s b e e n d e s i g n e d exclusively to be hung from the ceiling.It may malfunction if it is placed on a surface or if it is tilted.

●Do not install or use the camera in the following places.

•In a place exposed to rain or moisture.

•In a place with vapor or oil soot, for example in a kitchen.

•In a temperature outside the operating temperature range (–10°C to 50°C).

•Near a source of radiation, X-rays, strong radio waves or magnetism.

•In a place subject to vibration.

•In a place with excessive dirt.

●If this camera and the cables connected to this camera are used where there are strong electromagnetic waves or where there is magnetism present, for example near a radio or TV transmitter, power transformer or an electric motor, the picture may produce noise and the colors may be affected.

●This camera incorporates an AGC circuit. As a result, when it is used under low light conditions, the camera sensitivity is automatically boosted and the picture may look uneven. This is not a malfunction however.

●The white balance setting when used under a fluorescent lamp should be ATW (Auto White).

●When this camera is used in the ATW mode, the recorded colors may be slightly different from the actual colors due to the operational principles of the auto-tracking white balance circuit. This is however not a malfunction.