JVC TK-C553 manual Body Underside

Page 10

Controls, Connectors and Indicators

Camera Body

Body Underside

(Condition with terminal board attached.)

15

12		11
12		13
		13
		13
	14	10
	14
		9

13

8Terminal board

To connect the coaxial cable used as the video signal cable, the power cable, control signal cable, etc.

( See page 15)

9Video output terminal

Outputs composite video signals (1 V (p-p), output impedance 75Ω).

Should be connected to video input terminal on monitor, switcher, or remote control unit.

10Control signal connection terminals

Terminals for inputting signals with electrical characteristics conforming to the EIA/TIA RS-422A or RS-485 standard. Connected to the optional Remote Control Unit RM-P2580, etc.

8

11DC 12 V / AC 24 V input terminals

To input DC 12 V or AC 24 V power. The AC 24 V power supply should conform to the following:

U-type: Class 2 only

E-type: Isolated power supply only

12Terminal board cover

Protects the cable connection terminals from dirt, etc.

13Camera body mounting guides (⋅ 3)

To be inserted into the guide holes of the ceiling mount.

14Drop prevention wire hook

Attach the drop prevention wire to this hook.

15Camera positioning alignment mark

When mounting the camera onto the ceiling mount, align this mark with the mark on the mount.

10

Image 10

Contents TK-C553 Important Safeguards Page Safety Precautions Contents Features Precautions for Use with the RM-P2580 RM-P2580 P/T SpeedCamera Body Body SurfaceDIP switch Video synchronization selector switch Control signal termination ON/OFF Switch Body Underside Guide holes for mounting camera ⋅ Ceiling MountMounting holes ⋅ Camera clamping screwSystem with Remote Control Unit RM-P2580 SystemConnecting the control signal cable Function menu screen Menu Screen Settings Communication menu screenTermination OFF/ON Connections to Camera Terminal Board Connections to Terminal Board Video signal cables Control signal cablesCeiling Installation Attach the drop prevention wireRotate the camera body clockwise Adjusting the Camera Angle Attach the dome cover Connection for Adjustment of the Camera MonitorSetup Menu Setup Menu FlowFunction Screen Menu Settings Using the Operation Buttons on the Camera Body To save the setting contents, be sure to select MemoryMenu Settings Using the RM-P2580 CameraSetup Menu Screen Video Adjust Screen White AveragePeak ATW BalanceMode Select Screen Communication Screen Function Screen BLC Back Light Compensation Adjustment Fixed Light Metering AreasManual Adjustment of White Balance User Settable Light Metering AreasWhite Balance AWC One-push Auto White Balance Adjustment Menu shown is displayedCamera Text Setting RM-P2580Displayed only for E-version Auto Start Demo PAN, TILT, SCROLL, PatrolPosition Text Setting RM-P2580S I T I O N T E X T - 0 1 2 3 4 5 6 7 8 Auto Patrol Setting RM-P2580Place at this position Specifications External dimensions Unit mmTK-C553 Color Dome Camera