JVC WR-MG270, LYT2232-002A manuel dutilisation Order to use this product safely, Safety Precaution

Page 2

In order to use this product safely

Preparation (A Pg. 16)

•Check that there is no dirt, cracks, or damage to the O-ring.

•Always apply grease to the O-ring.

Safety Precaution

Before use, this unit must be pre- tested to check if there is any water leakage.

Please read before use

Attaching the Marine Case to the Camera (A Pg. 17, 18)

•Attach the power button cap depending on the camera used.

•Make sure that the O-ring is not twisted, and that you do not forget to attach it.

•When tightening the seal, make sure there are no foreign objects caught in the seal.

Recording the Video/Still Image Files (A Pg. 18, 19)

•Avoid opening and closing the marine case in the shooting location.

•When holding the marine case, lower it gently into the water.

Detaching the Marine Case/Maintenance (A Pg. 19, 20, 21)

•Always wash the marine case in fresh water after use.

•Perform maintenance on the O-ring.

If water leaks into the case due to careless use of the marine case, JVC cannot accept responsibility for any damage that may occur to the internal equipment and materials (video camera, SD card, etc.), or any expenses incurred in taking the photographs/video. Therefore, please be careful when using the marine case.

This marine case is a precision instrument designed to permit safe video recording under high water pressure. Please pay careful attention when handling the unit before and after use, as explained in this user’s manual.

Each part of the marine case has been subject to strict controls during the manufacturing process, and the individual functions have faced stringent tests during the assembly process. Each marine case has also had to pass waterproof inspections using high-pressure water testers. However, damage can sometimes occur during transport and distribution, or during storage after purchase, so before diving always carry out the following pre-use test to verify safety.

Pre-use test

Be sure to perform the following pre-use test before diving.

1.Before mounting the camera inside the marine case, dive with only the empty marine case and test for water leaks. Allow 5 or 6 minutes to ensure there are no leaks.

Be sure to perform this test to ensure the safety of your camera.

2.The following are some common causes of water leaks:

A.The marine case is used without attaching the O-ring.

B.The O-ring is not mounted in the correct position.

C.The O-ring is damaged or deformed.

D.There is sand, dirt, hair or other foreign matter on the O-ring.

E.There is sand, dirt, hair or other foreign matter on the contact surface of the O-ring or on the inside of the lid.

F.The provided strap or drying agent bag is pinched inside the marine case when the lid is closed.

12

Page 1 Page 3
Image 2
Page 1 Page 3
Contents WR-MG270 Safety Precaution Order to use this product safelyAccessories Maintenance Kit Sold Separately Part Number MG270MTKITAnti-fog liquid Procedures for Using the Supplied Maintenance KitStrap Drying agentBuckle opener Silicone clothHexagonal wrench small Screw tightening keyParts and Functions PreparationAttaching the Marine Case to the Camera Before recording Turn on the camera’s powerRecording the Video/Still Image Files Seal the marine caseIf there is a need to detach immediately Perform maintenance on the marine case. a PgDetaching the camera If there is no need to detach immediatelyPerforming salt removal Maintenance on the marine caseWash the marine case in water while it is still sealed Applicable camera models SpecificationsStoring the O-ring Let it dry completely in a shaded areaWR-MG270 日本語 As a general rule, each time before using Remove the O-ringJCracks JDistortion JCrushed JFrayed JNicks JSand corrosion Wipe off any residual greaseJDirt JSand JHair JDust JSalt JLint Apply silicone grease on the O-ring Check for any foreign matter in the O-ring grooveInsert the O-ring after inspection ¹ Do not store in hot and humid locations日本語

LYT2232-002A, WR-MG270 specifications

The JVC WR-MG270, also known by its model number LYT2232-002A, is a cutting-edge wireless microphone system designed for a wide range of professional audio applications. This device showcases JVC’s commitment to innovation, quality, and user convenience, making it an essential tool for filmmakers, content creators, and audio engineers.

One of the main features of the WR-MG270 is its high-quality audio transmission. Utilizing advanced digital signal processing technology, this wireless microphone system ensures clear and precise audio reproduction. The device operates in the UHF frequency range, which provides a stable signal with reduced interference, making it suitable for both indoor and outdoor recordings.

The microphone has a compact and lightweight design, making it easily portable and convenient for long-duration use. The versatility of the WR-MG270 is further enhanced by its adjustable sensitivity settings, allowing users to capture audio in various environments, from quiet interviews to louder, dynamic events.

The WR-MG270 also boasts a long battery life, which is crucial for extended shooting sessions. Equipped with rechargeable lithium-ion batteries, the microphone can last up to several hours on a single charge, ensuring that users can focus on their work without interruption due to power issues.

The system includes a user-friendly interface with clear display indicators for battery life, signal strength, and audio levels. This feature enables quick adjustments and ensures that users maintain optimal recording conditions throughout their projects. Additionally, the WR-MG270 supports multiple frequency channels, allowing for the simultaneous use of multiple microphones without interference.

Another key characteristic of the JVC WR-MG270 is its robust build quality. Designed to withstand the rigors of professional use, the microphone features durable housing that can endure various environmental conditions. Whether used in a controlled studio setting or on location in challenging weather, this microphone system is built to perform reliably.

In conclusion, the JVC WR-MG270, LYT2232-002A, is a sophisticated wireless microphone system that combines advanced technology with user-friendly features. With its high-quality audio transmission, long battery life, and durable design, it serves as an indispensable tool for professionals seeking to elevate their audio recording capabilities.
Top Page Image Contents